Fire and Smoke Restoration Questions And Answers | Updated Quiz | 100% Correct Answers

Technicians should not decide they will be able to restore a damaged item until they have __________ the item and communicated with the customer - Answer-pretest The restoration company works for the property owner, who is the primary customer. A secondary customer is the __________ __________ when the property owner is an __________ - Answerinsurance carrier, insured Smoke and soot particles are visual by-products of __________ __________. - Answer-incomplete combustion Heat, fuel, and oxygen are the key elements required for __________. - Answer-combustions The particle size range of combustion smoke particles is _____, ______ microns. - Answer-.1 , 4 The general categories into which all smoke residues may be places are PAH (Polycyclic Aromatic Hydrocarbons) and __________. - Answer-sout Both PAH and soot particles have been reported to be ___________ to humans. - Answer-carcinogenic A very difficult smoke odor for technicians to overcome is the __________ __________ odor, also called "psychological" odor. - Answer-heightened awareness To remove high levels of protein odor from surfaces, ______ __________ is usually required for cleaning protein residues. - Answer-wet cleaning When burned, this material will provide a thick, heavy black smeary residue. - Answer-Synthetic Factors to consider in determining the degree of smoke contamination throughout a structure are the air _______ and ________ generated during combustion. - Answer-pressure, temperatureThe severity of soot contamination increases with a ________ of oxygen and decreases when a _________ _______ of oxygen is present during the fire. - Answer-lack, greater quantity Some materials and surfaces naturally adsorb more odors than others. The odor control industry refers to them as "__________ _______" - Answer-Natural wicks During a fire, smoke can carry vaporized oils, which eventually settle to leave an _______ ______ on surfaces, which is difficult to remove. - Answer-oily film Lighter plastic surfaces subjected to higher temperatures and soot have protentional to _________ irreversibly. - Answer-yellow From a common sense perspective, safety on the job site is the responsibility of _______________. - Answer-everyone Safety regulations require companies to prepare a hazardous chemical program, issue appropriate safety ___________ to employees, and provide them with safety _________. - Answer-equipment, training Restorers may obtain the most accurate information about potential chemical safety from: ___________ sheets, labels, and ___________. - Answer-safety data , equipment All restoration chemicals must be kept in properly __________ containers and secured on the job site. - Answer-labeled Advise the chemically- sensitive customers to not be ______ the affected areas while work is being performed and ask for their _____ consent of product use. - Answer-in, informed When working for a customer who is chemically _________, there may be need for special air scrubbing, cleaning agents and deodorizing agents. - Answer-sensitive When working in areas containing loose soot residue, it is highly recommended that restorers use appropriate _____ air scrubbers and don ______. - Answer-HEPA, PPE___________ and ________ are two commonly found invisible safety hazards to be aware of within older structures. - Answer-Lead, Asbestos ________ is a heavy metal that was commonly incorporated into paint formulations. - Answer-Lead ___________ was used in various building materials (siding, roofing, flooring, adhesives) as an insulating and fire-retarding material. - Answer-Asbestos