sUAS Safety Certification Practice Exam Questions and Answers 100% Pass

sUAS Safety Certification Practice Exam Questions and Answers 100% Pass Before any flight, the Remote Pilot in Command (RPIC) should verify that the aircraft is correctly loaded by determining the _____. - Correct Answer ️️ -center of gravity by calculating weight and balance What frequency should be monitored if you are close to an airport that does not have a tower? - Correct Answer ️️ -common What term describes the effective use of all available resources—human, hardware, and information—prior to and during flight to ensure the successful outcome of an operation? - Correct Answer ️️ -Crew Resource Management What is used to transmit digital imagery from the remote sensing platform to a ground station? - Correct Answer ️️ -Radio frequency (RF) datalink Uncontrolled airspace or _________ is not designated as Class A, B, C, D, or E. - Correct Answer ️️ -Class G airspace If there are no scheduled maintenance instructions provided by the sUAS manufacturer or component manufacturer, the Remote Pilot in Command (RPIC) should establish a scheduled maintenance protocol. - Correct Answer ️️ -True Prior to a flight, to make sure the air vehicle proceeds to a landing point, what do you need to do if a lost link situation occurs? - Correct Answer ️️ -have a previously programmed lost communications flight plan A waypoint is a geographic location where the Unmanned Aircraft Vehicle (UAV) transitions through as part of a flight path. - Correct Answer ️️ -True The technology that enables unmanned aircraft systems to sense other aircraft and obstacles is known as 'Global Positioning'. - Correct Answer ️️ -False Crew Resource Management is the practice of safe maintenance procedures and clear, well-kept documentation. - Correct Answer ️️ -False Class C airspace is generally airspace from the surface to 4000' within 5 NM of the field and ______ to 4000' between 5-10 NM from the field. - Correct Answer ️️ -1200 feet Above Ground Level (AGL) You no longer need a Certificate of Waiver for two types of flight operations. What are they? (Select two) - Correct Answer ️️ -Operate UAS at night with sUAS meeting the requirements defined in the rule Fly over spectators with sUAS meeting the requirements defined in the rule A datalink's strength or range can be limited by ________. - Correct Answer ️️ - environmental factors, towers, distance, power, and antenna type The purpose of a datalink is to ________. - Correct Answer ️️ -establish reliable communications between the UAV and ground control station (GCS) The lowest layer of clouds described as either ________.make up the cloud ceiling, which is the height above ground level. - Correct Answer ️️ -broken or overcast The ________ is a type of image taken from a UAS that easily highlights differences in temperature. - Correct Answer ️️ -thermogram How would you define the physical aspects of a small unmanned aircraft (UA) to a friend? - Correct Answer ️️ -A UA weighs less than 55 pounds, including everything onboard or attached to the aircraft There are three primary elements of unmanned aircraft systems. They are the mechanical structure, _______ and _______. - Correct Answer ️️ -Electronic systems, software program Aircraft performance is directly affected by ___________. - Correct Answer ️️ -density altitude The process of identifying, assessing, and prioritizing hazards and their potential impact is known as ________. - Correct Answer ️️ -Risk Management The method used to track reliability of unmanned aircraft components is known as ________. - Correct Answer ️️ -Mean Time Between Failure (MTBF) A small unmanned aircraft may be directed through manual manipulation of flight controls or through commands using automation. - Correct Answer ️️ -True Line of Sight (LOS) means that the radio wave will reach its destination if there are no obstacles in the way and if the curvature of the earth is not bloc