NCCER Module 2 Questions and Answers 100% Pass

An estimator is preparing a bid for a home remodeling project. She has determined that the new garage needs 324 feet of 2x10 lumber; the new rec room requires 430 feet; and the new upstairs bonus room needs 283 feet. How many feet of 2x10 lumber will be needed? - 1,037 feet A plumbing contractor bid the rough-in work for a new three story office building based an estimate of 850 hours of a journey-level plumber's time on the job. After the job was in progress, the contractor determined that the first floor required 342 hours and the second floor required 329 hours. How many labor hours are left in estimate to complete the third floor? - 179 hours The estimator for a heating, ventilation, and air conditioning (HVAC) contractor estimated that the new hospital would require 5,840 feet of sheet metal ductwork. The order is too large for a single fabricator, so it was decided to split the order among four fabricators. Fabricator 1 received an order for 2,500 feet; Fabricator 2 obtained an order for 1,200 feet; and Fabricator 3 was awarded a contract for 1,150 feet. How many feet of ductwork would be required of Fabricator 4? - 990 feet A contractor places an order with a building supply company for three exterior doors to be installed in a new home. The front door costs $635, the door to the garage costs $355, and the sliding door to the deck costs $1,232. What is the total amount of the order? - $2,222 Sally works as an estimator for G&J Electric. She has determined that 550 feet of electrical cable will be needed to wire a new house. Later, Sally is told that the homeowner has decide to cut back from a three-car garage to a two-car garage, which will eliminate two branch circuits, one of 23 feet and the other of 34 feet. How many feet of wi