NCCER Module 9 Introduction to Materials Handling with questions & correct answers latest update already graded A+

NCCER Module 9 Introduction to Materials Handling with questions & correct answers latest update already graded A+ To prevent a tip over when driving a rough terrain forklift, keep the load________. - ANSWERLow The forklift hand signal for "dog everything" means___________. (Clasp hands in front of body) - ANSWERTo pause What does a signal with arms both extended and palms down mean? - ANSWERStop The knot shown in the figure is a _______. - ANSWERSquare knot The knot shown in the figure is a _____. - ANSWERBowline square knot - ANSWERA knot made of 2 reverse half-knots and typically used to join the ends of 2 ropes of similar diameters bowline - ANSWERA knot used to form a loop that neither slips nor jams Half hitch - ANSWERA knot tied by passing the working end of a rope around an object, across the standing part of the rope, and then through the resulting loop When stacking bags of material that are the same width, step back and cross key the bags________. - ANSWERAt least every 10 bags high When moving a material cart on an inclined or declined surface, you must be sure the load does not exceed the labeled __________capacity. - ANSWERweight Never stack or store materials_______. - ANSWEROn scaffolds When using hand signals, you must always keep __________contact with the operator. - ANSWEReye The knot shown in the figure above is a ___________. - ANSWERClove hitch One common way to tie a clove hitch is to use two___________. - ANSWERHalf hitches How is the fall zone for a fork lift operation best defined? - ANSWERThis area includes the area directly beneath a load, as well as any portion of the area that suspended materials could possibly fall into. What device may have a rotating table surface and/or spikes on the table surface for a better grip? - ANSWERRoller skids To transport a bottle of compressed gas, use a________. - ANSWERCylinder cart