Revit Certification Questions and Answers Already Passed

Revit Certification Questions and Answers Already Passed Which part of the user interface changes according to the command you are using? Option bar Which of the following is an example of subtractive modeling? Modeling a large project using voids to create the desired shape T or F: When using roof by face, you give up the option to input a manual base offset True When placing sun location in revit you should always do the following Use real world location using a project specific address and relevant settings What tool allows you to change the wall type from generic 8" to brick on metal studs? Type selector T or F: you must make wall openings before you can place a window or door False How are stacked walls commonly used? When a concrete block or cast I place concrete wall is used as base material and a framed wall is intended to sit above it. T or F: curtain walls can be embedded into plastic wall types. False Which of the following methods makes a wall touch and follow the shape of the underside of a roof? Select the wall and use attach top/base To create a flat roof which of the following commands would you use to sketch the boundary of the roof and to set its thickness? Roof by footprint with the thickness set by the roof type. T or F: when drawing a roof by footprint in plan view, all lines must define slope. False T or F: stairs are automatically drawn in revit: all you need to do is set the base and top constraints and select the appropriate stair family False T or F: stairs must have an associated bottom level by may or may not have have an associated top level True T or F: openings in revit should always be placed using the by face tool False The purpose of call outs is to create Enlarged plan view of the model, plan, elevation, or section. Which is not a type of revit column Commercial When creating a floor the boundary sketch must be Closed with no intersecting and no overlapping lines. T or F: ceilings in revit must be placed in rooms