Revit Chapter 6 Questions and Answers 100% Pass

Revit Chapter 6 Questions and Answers 100% Pass The default settings for the floor plan view shows the walls for the floor below True You should start drawing your floor plan generally centered on the default elevation marks in a new project True You can use the Align took to align one wall with the another True Where do you change the maximum riser height? Type Properties Revit's dimension tool can snap to the middle of a door opening without the need to draw a temporary line to snap to True Each Revit view is saved as a separate file on your hard drive False You select the part of the wall to be deleted when using the Trim tool. False You cannot "finish stair" if you have not drawn all the treads or risers that are required between the two specified levels. True What parameter should be set to none, in the View Properties dialog, if you do not want to see the walls from the floor below? Underlay The _______ ________ controls the size of dimensions and text, plus the scale that view is placed on a sheet. View Scale You can use the ______ tool to quickly select a certain type of element from a large group of selected objects. Filter The number of _______ remaining is displayed