ATE 106 Full Review Questions And Answers Verified By Expert

ATE 106 Full Review Questions And Answers Verified By Expert You are performing a weight and balance check on an aircraft after a major repair. To find the aircraft's center of gravity range, you should look in: The applicable Type Certificate Data Sheet To find information on your rights, privileges and limitations as a certificated mechanic, you should refer to: FAR Part 65 Which of the following is NOT required to be entered in the permanent aircraft records: Total time in service of the airframe, Current status of applicable Airworthiness Directives, Amount of oil added to the engine, Current inspection status of the aircraft Amount of oil added to the engine When performing an annual inspection, you must use a checklist that at a minimum covers the items specified in:AC 43.13 appendix G . AC 43.9 FAR Part 91 None of the above None of the above When returning an aircraft to service after an inspection, which item is NOT required to be entered in the permanent records?A list of all parts and consumable items used in the inspection; The type of inspection and a brief description of the extent of the inspection; The signature, certificate number, and certificate type of the person approving or disapproving the aircraft for return to service; The date of the inspection and aircraft total time in service A list of all parts and consumable items used in the inspection FAA Form 8130-7, Special Airworthiness Certificate, is effective: For a limited period of time When filling out form 337 block 8, a description of the work performed, you must include:A checklist of your own design that conforms to appendix D of FAR Part 43 Technical data acceptable to the Administrator of the FAA Standard industry practices. None of the above Technical data acceptable to the Administrator of the FAA