FOA CFOT Certification Exam v11 Questions and Answers 100% Pass

FOA CFOT Certification Exam v11 Questions and Answers 100% Pass A fiber optic inspection microscope can increase the danger of high powered light sources by focusing the light coming out of a fiber into your eye. True or False? - Answer- True A fiber optic power meter measures absolute power in dBM (dB referenced to 1 mw) and, when used with a light source, can measure insertion loss expressed in dB. True or False? - Answer- True When we say 62.5/125 fiber, what does "62.5" mean? - Answer- core size, the diameter in microns When we say 50/125 fiber, what does "125" mean? - Answer- cladding size, the diameter in microns OM3 and OM4 multimode fiber with a 50/125 micron core are now a popular option in premises cabling systems because they _____. - Answer- Are "laser optimized" which gives more distance capability with gigabit networks using laser sources In-multimode fiber, the attenuation (reduction in optical power) of the fiber is _____ at 850 nm than at 1300 nm. - Answer- Higher Which of the following represents a singlemode (smaller core size) fiber size? - Answer- 9/125 micron Singlemode fiber has _____ bandwidth than multimode fiber. - Answer- greater Most plastic optical fibers are _____. - Answer- large core step-index When you strip singlemode or graded index multimode mode glass fiber, you are removing the ____. - Answer- Primary buffer coating The proper method of pulling optical fiber cables is to attach the pull wire or tape to the ____ of the cable. - Answer- Strength members According to the references, hybrid cables are cables that contain ____. - Answer- Both singelmode and multimode optical fibers What type of fiber cable design allows for large numbers of fibers with ultra-high density, small size (diameter) and lower cost? - Answer- ribbon According to the references, composite cables refer to cables that contain ____> - Answer- both optical fibers and copper conductors Which optical fiber cables must be grounded? - Answer- all cables that contain metallic elements Fiber optic cable for use inside a building must _______. - Answer- Be rated to meet the requirements of local building and fire codes Optical fiber cable with a orange colored jacket generally indicates the cable contains _____. - Answer- Multimode fiber Premises cable jackets are usually color-coded in what color to indicate singlemode fiber? - Answer- Yellow