FIRE INSPECTOR II REAL QUESTIONS AND CORRECT ANSWERS LATEST UPDATE GRADED A+ How big are DOT labels? - ANSWER-4 inch square, on point Where is the primary DOT label? - ANSWER-On the left How many hazards can be on a DOT label? - ANSWER-several NFPA 704

FIRE INSPECTOR II REAL QUESTIONS AND CORRECT ANSWERS LATEST UPDATE GRADED A+ How big are DOT labels? - ANSWER-4 inch square, on point Where is the primary DOT label? - ANSWER-On the left How many hazards can be on a DOT label? - ANSWER-several NFPA 704 - ANSWER-Hazardous Materials Marking System Placard: Blue means..... - ANSWER-Health Hazard Placard: Red means.... - ANSWER-Flammability Hazard Placard: Yellow means.... - ANSWER-Instability Placard: White means...... - ANSWER-Special Hazards 5 Special Hazards - ANSWER-(1) Combustable Dust Fibers (2) Spraying/painting dip tanks (3) Compressed Gasses (4)Welding and cutting (5) Hazardous chemicals Article 15 of NFPA 70 - ANSWER-National Electric Code, Divided into 3 classes Class I Locations - ANSWER-Flammable gases and vapors exist under normal conditions Class I Division I Location - ANSWER-Ignitable conditions exist due to repairs or maintenance Class I Division II Location - ANSWER-Ignitable conditions produced or used but confined to closed containers or systems Class II Locations - ANSWER-Hazard is due to combustable dust