Dell Certified Exam Questions With 100%
Correct Answers 2024.
BIOS recover 2 from hard drive option can be disabled in ?
Bios
When the option is disabled, BIOS will not save a copy of recovery file into the HD when user flash the
BIOS
The setting is set to enable by default
It is not possible to recovery BIOS from the Hard Drive is the customer unchecked this option before
failure occurred
The BIOS recovery 2 does not support recovery from?
Encrypted HDD
When HDD passwords set
BR2 will attempt to search for the recovery image but eventually will fail as indicated by LED codes
If recovery image from both systems primary hard drive and external USB key are present. Which
image will bios recover 2 select?
USB Key
Which of the following items are not affected by the RTC reset?
Service tag
Asset Tag
Ownership tag
Admin password
System password
HDD password
Key databases
System logs
Maybe
The boot list
Enable legacy option ROMs
, Secure boot enable
Bios downgrade
When encountered with a no post situation, what must technicians do prior to replacing the suspected
failed part?
Memory modules and expansion cards should be reseated. This means that memory modules or
expansion cards should be removed from their sockets and then replaced
Whenever possible, find a known good part that you can swap with a part that you suspect might be
bad.
Whenever possible remove or disconnect all the nonessential components from the computer. If the
part is not necessary to recreate the problem. Remove it
What's the easiest way to verify the functionality of a system board?
By removing the memory module. If 4 beeps are not heard while turning on the system then the system
board is faulty
What is the status of the power LED when a system board failure has occurred?
Off
How do you enable bios auto recovery?
Settings, maintenance, bios recovery, enable bios auto recovery
Pc Doctor usb solutions offer?
DOS test: Runs diagnostics in DOS mode to identify hardware failure
Windows test (interactive): runs the diagnostics in window mode to identify hardware failure and
interactive
Individual diagnostics: runs the diagnostics on a specific part
How will you initiate Epsa in a dell system?
Turn on the system
At the dell splash screen tap F12 Continuously until the one time boot menu appears
Using the down arrow key navigate to the diagnostics option and press the enter key to start eSPA.
At about 15 seconds after starting the eSPA user will hear a beep and a question will appear on the
system screen, if colors are displayed properly. Press Y key for yes and continue to the eSPA
Correct Answers 2024.
BIOS recover 2 from hard drive option can be disabled in ?
Bios
When the option is disabled, BIOS will not save a copy of recovery file into the HD when user flash the
BIOS
The setting is set to enable by default
It is not possible to recovery BIOS from the Hard Drive is the customer unchecked this option before
failure occurred
The BIOS recovery 2 does not support recovery from?
Encrypted HDD
When HDD passwords set
BR2 will attempt to search for the recovery image but eventually will fail as indicated by LED codes
If recovery image from both systems primary hard drive and external USB key are present. Which
image will bios recover 2 select?
USB Key
Which of the following items are not affected by the RTC reset?
Service tag
Asset Tag
Ownership tag
Admin password
System password
HDD password
Key databases
System logs
Maybe
The boot list
Enable legacy option ROMs
, Secure boot enable
Bios downgrade
When encountered with a no post situation, what must technicians do prior to replacing the suspected
failed part?
Memory modules and expansion cards should be reseated. This means that memory modules or
expansion cards should be removed from their sockets and then replaced
Whenever possible, find a known good part that you can swap with a part that you suspect might be
bad.
Whenever possible remove or disconnect all the nonessential components from the computer. If the
part is not necessary to recreate the problem. Remove it
What's the easiest way to verify the functionality of a system board?
By removing the memory module. If 4 beeps are not heard while turning on the system then the system
board is faulty
What is the status of the power LED when a system board failure has occurred?
Off
How do you enable bios auto recovery?
Settings, maintenance, bios recovery, enable bios auto recovery
Pc Doctor usb solutions offer?
DOS test: Runs diagnostics in DOS mode to identify hardware failure
Windows test (interactive): runs the diagnostics in window mode to identify hardware failure and
interactive
Individual diagnostics: runs the diagnostics on a specific part
How will you initiate Epsa in a dell system?
Turn on the system
At the dell splash screen tap F12 Continuously until the one time boot menu appears
Using the down arrow key navigate to the diagnostics option and press the enter key to start eSPA.
At about 15 seconds after starting the eSPA user will hear a beep and a question will appear on the
system screen, if colors are displayed properly. Press Y key for yes and continue to the eSPA
