BECC TEST 1 UPDATED QUESTIONS AND ANSWERS
2024/2025
Which of the following describes the contents of 200 series part of the PQS?
The components and component parts of a system
Who is responsible for maintaining the list of qualified signers for a personnel
qualification standard?
Unit coordinator
Who is responsible for ensuring service record entires are done for completed
personnel qualification system?
DIVO
What program trains for watches or duties necessary for the safe operation of a
ship?
PQS
Which of the following serve as the central point of contact for all PQS
documentation matters?
Unit coordinator
What type of protective eyewear is required when handling fuels?
Non-vented chemical goggles
What would not provide a secure breathing environment in hoods or helmets?
Rips, tears, seam integrity
Double hearing protection must be worn by all personnel when sound pressure
equal to or greater than ______ continues
96dBA
What can impede proper airflow in inhalation and exhalation valves?
Foreign materials
What kind of gloves should always be worn when welding or handling sharp
objects?
Leather
What is the first thing sailors must assess when identifying the appropriate head
protection?
The hazards associated with the task
What is the EEBD used for?
Egress and emergency
What type of tool is used to measure the width of narrow slots?
Feeler gauges
Why might you use an impact wrench instead of a socket wrench?
To remove a fastener more quickly or forcefully
What must be done prior to connecting an electrical tool to a power source?
Ensure the power switch is off.
What must be done prior to checking out a calibrated tool?
Inspect calibration sticker
Who will the maintenance person notify if there is a step on a MRC that they do
not fully understand?
WCS
, Which of the following provides a detailed procedure for performing preventative
measure?
MRC
The syscom control number assigned for each maintenance requirement listed in
a maintenance index page must match the number on the corresponding-
MRC
Which of the following documents is a detailed procedure to follow to execute
preventative maintenance?
MRC
Which of the following inactive equipment maintenance periodicity codes is used
to ensure equipment is suitable for operation when reactivating?
Start up maintenance
TRUE OR FALSE: The PMS schedule is used to verify that the MRC is up to date.
FALSE
What is the maintenance that identifies and corrects potential problems before
equipment becomes inoperable?
Preventative maintenance
Who can authorize changes made to a work centers quarterly PMS schedule?
DIVO
The MRC syscom control number on the MRC must match the syscom control
number on the?
MIP
The maintenance procedure steps on the MRC are?
To be followed precisely
What is used to indicate a step in a work procedure that must be performed
correctly the first time and requires?
Critical quality control points (Q-points)
Which form is used to authorize the start of work on all ship systems and
equipment by activities other than ships?
Work authorization form (WAF)
When equipment operation is prohibited a ____ tag is used.
Red Danger
When should an out of calibration (CAL) label be used?
When an instrument error is small and consistent
What is done every two weeks to ensure that all issued tags are hanging and are
in the correct position and condition?
Tag-out audit
When a personnel hazard is involved, a ______ is used.
Danger tag
Who will determine whether or not the commanding officers permission is
required for a tag out?
Authorizing officer (AO)
TRUE OR FALSE: A caution tag allows operation of an item as long as the special
instruments are understood.
TRUE
Who can authorize removal of tags and labels?
2024/2025
Which of the following describes the contents of 200 series part of the PQS?
The components and component parts of a system
Who is responsible for maintaining the list of qualified signers for a personnel
qualification standard?
Unit coordinator
Who is responsible for ensuring service record entires are done for completed
personnel qualification system?
DIVO
What program trains for watches or duties necessary for the safe operation of a
ship?
PQS
Which of the following serve as the central point of contact for all PQS
documentation matters?
Unit coordinator
What type of protective eyewear is required when handling fuels?
Non-vented chemical goggles
What would not provide a secure breathing environment in hoods or helmets?
Rips, tears, seam integrity
Double hearing protection must be worn by all personnel when sound pressure
equal to or greater than ______ continues
96dBA
What can impede proper airflow in inhalation and exhalation valves?
Foreign materials
What kind of gloves should always be worn when welding or handling sharp
objects?
Leather
What is the first thing sailors must assess when identifying the appropriate head
protection?
The hazards associated with the task
What is the EEBD used for?
Egress and emergency
What type of tool is used to measure the width of narrow slots?
Feeler gauges
Why might you use an impact wrench instead of a socket wrench?
To remove a fastener more quickly or forcefully
What must be done prior to connecting an electrical tool to a power source?
Ensure the power switch is off.
What must be done prior to checking out a calibrated tool?
Inspect calibration sticker
Who will the maintenance person notify if there is a step on a MRC that they do
not fully understand?
WCS
, Which of the following provides a detailed procedure for performing preventative
measure?
MRC
The syscom control number assigned for each maintenance requirement listed in
a maintenance index page must match the number on the corresponding-
MRC
Which of the following documents is a detailed procedure to follow to execute
preventative maintenance?
MRC
Which of the following inactive equipment maintenance periodicity codes is used
to ensure equipment is suitable for operation when reactivating?
Start up maintenance
TRUE OR FALSE: The PMS schedule is used to verify that the MRC is up to date.
FALSE
What is the maintenance that identifies and corrects potential problems before
equipment becomes inoperable?
Preventative maintenance
Who can authorize changes made to a work centers quarterly PMS schedule?
DIVO
The MRC syscom control number on the MRC must match the syscom control
number on the?
MIP
The maintenance procedure steps on the MRC are?
To be followed precisely
What is used to indicate a step in a work procedure that must be performed
correctly the first time and requires?
Critical quality control points (Q-points)
Which form is used to authorize the start of work on all ship systems and
equipment by activities other than ships?
Work authorization form (WAF)
When equipment operation is prohibited a ____ tag is used.
Red Danger
When should an out of calibration (CAL) label be used?
When an instrument error is small and consistent
What is done every two weeks to ensure that all issued tags are hanging and are
in the correct position and condition?
Tag-out audit
When a personnel hazard is involved, a ______ is used.
Danger tag
Who will determine whether or not the commanding officers permission is
required for a tag out?
Authorizing officer (AO)
TRUE OR FALSE: A caution tag allows operation of an item as long as the special
instruments are understood.
TRUE
Who can authorize removal of tags and labels?
