IPC A 610 Exam 2023
with Questions and
Answers
, IPC A 610 Exam 2023 with Questions and
Answers
Class 1 Product - ANSWER General Electronics Product - includes products where
the major requirement is function of the completed assembly.
Class 2 Product - ANSWER Dedicated Service Electronic Product - Continued
performance and extended life required. Uninterrupted service is desired but not
required.
Class 3 Product - ANSWER High Performance Electrical Product - Continued high
performance or performance-on-demand is critical. Equipment downtime cannot
be tolerated. Equipment might be used for life-support or other critical systems.
Who as the ultimate responsibility for identifying the class to which the assembly
is evaluated? - ANSWER The Customer.
Shall - ANSWER Invokes a requirement for manufacturers of all classes or
product, and failure to comply with the requirement is a noncompliance to this
standard.
Order of Precedence in event of conflict 1 - ANSWER 1. Procurement as agreed
and documented between customer and supplier.
Order of Precedence in event of conflict 2 - ANSWER Master drawing or master
ass. drawing reflecting the customer's detailed requirements.
Order of Precedence in event of conflict 3 - ANSWER IPC-1-610 when invoked by
the customer or contract.
If documents other than IPC-A-610 are cited, the order of precedence shall be
defined in the _ - ANSWER Procurement documents
Target Condition - ANSWER A condition that is close to perfect, but is not always
achievable and may not be necessary to ensure the reliability of the assembly.
Acceptable Condition - ANSWER A condition that, while not necessarily perfect,
will maintain integrity and reliability of the assembly
Defect Condition - ANSWER The form, fit or function of the assembly is
inadequate for use in its end use environment.
with Questions and
Answers
, IPC A 610 Exam 2023 with Questions and
Answers
Class 1 Product - ANSWER General Electronics Product - includes products where
the major requirement is function of the completed assembly.
Class 2 Product - ANSWER Dedicated Service Electronic Product - Continued
performance and extended life required. Uninterrupted service is desired but not
required.
Class 3 Product - ANSWER High Performance Electrical Product - Continued high
performance or performance-on-demand is critical. Equipment downtime cannot
be tolerated. Equipment might be used for life-support or other critical systems.
Who as the ultimate responsibility for identifying the class to which the assembly
is evaluated? - ANSWER The Customer.
Shall - ANSWER Invokes a requirement for manufacturers of all classes or
product, and failure to comply with the requirement is a noncompliance to this
standard.
Order of Precedence in event of conflict 1 - ANSWER 1. Procurement as agreed
and documented between customer and supplier.
Order of Precedence in event of conflict 2 - ANSWER Master drawing or master
ass. drawing reflecting the customer's detailed requirements.
Order of Precedence in event of conflict 3 - ANSWER IPC-1-610 when invoked by
the customer or contract.
If documents other than IPC-A-610 are cited, the order of precedence shall be
defined in the _ - ANSWER Procurement documents
Target Condition - ANSWER A condition that is close to perfect, but is not always
achievable and may not be necessary to ensure the reliability of the assembly.
Acceptable Condition - ANSWER A condition that, while not necessarily perfect,
will maintain integrity and reliability of the assembly
Defect Condition - ANSWER The form, fit or function of the assembly is
inadequate for use in its end use environment.
