Certified Playground Safety Inspector (CPSI) Exam Prep 2023 Questions and Answers Graded A+
To be compliant with ASTM 1487, a designer or manufacturer of playground equipment should - provide buyers with a parts list for the playground 2. The fish or wedge probe is used to determine whether or not a hazard exists on - a partially bounded opening 3. Which of the following is correct regarding the impact-attenuation of surfacing material - Critical height must equal or exceed fall height 4. When evaluating the structural integrity of a support structure for a swing that appears to be failing, a CPSI should - hire a licensed professional engineer to certify the integrity of the equipment 5. Manufacturers of playground equipment must: provide the manufacturer's identification of the equipment - 6. The majority of injuries associated with playground equipment result from - falls to the surface on which the equipment was located 7. An opening may present a common crush or shear hazard only if it - grabs the 5/8" (16mm) dowel 8. The criteria for unitary surface materials includes meeting requirements of - ASTM F1292 and F1487 9. Regarding playground safety signage, which of the following is correct - Signage may not prevent accidents but may reduce liability 10. Which of the following factors is MOST important when determining the frequency of inspections of surfacing - Type of surfacing and amount of use 11. When planning a playground for public use, the play equipment that is chosen must - be appropriate for the age of intended users 12. A spring rocker with seat height of 26" is about to be installed adjacent to the side of a fully enclosed bucket swing set. The minimum distance required between the swing set and the rocker is - 108" or 9' 13. The Site History File for a playground should contains - a comprehensive inventory of all
Escuela, estudio y materia
- Institución
- CPSI - Certified Playground Safety Inspector
- Grado
- CPSI - Certified Playground Safety Inspector
Información del documento
- Subido en
- 21 de enero de 2024
- Número de páginas
- 5
- Escrito en
- 2023/2024
- Tipo
- Examen
- Contiene
- Preguntas y respuestas
Temas
-
to be compliant with astm 1487 a designer or manu
-
2 the fish or wedge probe is used to determine wh
-
3 which of the following is correct regarding the
-
4 when evaluating the structural integrity of a s
Documento también disponible en un lote