SCMN test 3 Exam Review With complete solution 2023/2024
Questions and Answers
When capacity does not match the plan, which of the following actions can be taken?
I. Provide sufficient capacity
II. Change the material plan
III. Modify capacity calculations - Correct Answer:I and II
which of the following is an objective of capacity planning?
I. building excess capacity for possible future use
II. estimating capacity requirements early enough to take action if necessary
III. Execution of the plan to avoid suprises - Correct Answer:I and III
which capacity planning activities are considered long-range planning
a. resource planning and rough-cut capacity planning
b. capacity requirements planning
c. finite scheduling
d. input/output analysis - Correct Answer:a. resource planning and rough-cut capacity planning
which capacity planning activities are considered short-range planning
a. resource planning
b. rough cut capacity planning
c. capacity requirements planning
d. finite scheduling and input/output analysis - Correct Answer:d. finite scheduling and
input/output analysis
resource planning is the most closely linked to which manufacturing planning and control (MPC)
element - Correct Answer:SOP
capacity requirements planning (CRP) is most closely linked to which manufacturing planning
and control MPC element - Correct Answer:detail marketing planning
which capacity planning technique is based on accounting and/or historical data?
a. capacity planning using overall factors
b. capacity bills
c. resource profiles
d. capacity requirements planning - Correct Answer:a. capacity planning using overall factors
the capacity planning using overall factors (CPOF) planning method is likely to function poorly
in a just-in-time (JIT) environment - Correct Answer:false
T/F
The capacity bill planning technique provides more direct linkages to end products than does the
capacity planning using overall factors (CPOF) planning method. - Correct Answer:true
, Under what conditions are both capacity planning using overall factors (CPOF) and capacity
bills likely to return the same capacity requirement results?
a. when planning for a single product
b. when planning for a single work center
c. when planning for a single product that is produced in a single work center
d. the two methods will never return the same result - Correct Answer:When planning for a
single product that is produced in a single work center.
Resource profile planning differs from capacity planning using overall factors (CPOF) and
capacity bills by considering what?
a. custom orders
b. projected workload in individual work centers
c. future capacity expansions
d. inventory plans - Correct Answer:Projected workload in individual work centers
in which of the following ways does capacity planning (CRP) differ from rough-cut capacity
planning techniques
I. CRP uses a time-phased approach
II. CRP considers service part demand
III. CRP considers standard lot sizes - Correct Answer:I and II
T/F
Capacity requirements planning (CRP) ignores current finished goods and work-in-process
inventory levels. - Correct Answer:false
Which of these planning techniques requires the most computing resources?
A.Resource profiles
B.Capacity requirements using overall factors (CPOF)
C.Capacity requirements planning (CRP)
D.Capacity bills - Correct Answer:C.Capacity requirements planning (CRP)
Which of the following are benefits of simultaneous planning of capacity and materials?
I. Fewer compute resources required
II. Better utilization of existing capacity
III. Eliminates the need to expand capacity - Correct Answer:II
T/F
Finite scheduling techniques always assign jobs to available capacity on a first-come, first-served
basis. - Correct Answer:False
T/F
The horizontal loading scheduling approach is more likely to result in higher capacity utilization.
- Correct Answer:False
T/F
Questions and Answers
When capacity does not match the plan, which of the following actions can be taken?
I. Provide sufficient capacity
II. Change the material plan
III. Modify capacity calculations - Correct Answer:I and II
which of the following is an objective of capacity planning?
I. building excess capacity for possible future use
II. estimating capacity requirements early enough to take action if necessary
III. Execution of the plan to avoid suprises - Correct Answer:I and III
which capacity planning activities are considered long-range planning
a. resource planning and rough-cut capacity planning
b. capacity requirements planning
c. finite scheduling
d. input/output analysis - Correct Answer:a. resource planning and rough-cut capacity planning
which capacity planning activities are considered short-range planning
a. resource planning
b. rough cut capacity planning
c. capacity requirements planning
d. finite scheduling and input/output analysis - Correct Answer:d. finite scheduling and
input/output analysis
resource planning is the most closely linked to which manufacturing planning and control (MPC)
element - Correct Answer:SOP
capacity requirements planning (CRP) is most closely linked to which manufacturing planning
and control MPC element - Correct Answer:detail marketing planning
which capacity planning technique is based on accounting and/or historical data?
a. capacity planning using overall factors
b. capacity bills
c. resource profiles
d. capacity requirements planning - Correct Answer:a. capacity planning using overall factors
the capacity planning using overall factors (CPOF) planning method is likely to function poorly
in a just-in-time (JIT) environment - Correct Answer:false
T/F
The capacity bill planning technique provides more direct linkages to end products than does the
capacity planning using overall factors (CPOF) planning method. - Correct Answer:true
, Under what conditions are both capacity planning using overall factors (CPOF) and capacity
bills likely to return the same capacity requirement results?
a. when planning for a single product
b. when planning for a single work center
c. when planning for a single product that is produced in a single work center
d. the two methods will never return the same result - Correct Answer:When planning for a
single product that is produced in a single work center.
Resource profile planning differs from capacity planning using overall factors (CPOF) and
capacity bills by considering what?
a. custom orders
b. projected workload in individual work centers
c. future capacity expansions
d. inventory plans - Correct Answer:Projected workload in individual work centers
in which of the following ways does capacity planning (CRP) differ from rough-cut capacity
planning techniques
I. CRP uses a time-phased approach
II. CRP considers service part demand
III. CRP considers standard lot sizes - Correct Answer:I and II
T/F
Capacity requirements planning (CRP) ignores current finished goods and work-in-process
inventory levels. - Correct Answer:false
Which of these planning techniques requires the most computing resources?
A.Resource profiles
B.Capacity requirements using overall factors (CPOF)
C.Capacity requirements planning (CRP)
D.Capacity bills - Correct Answer:C.Capacity requirements planning (CRP)
Which of the following are benefits of simultaneous planning of capacity and materials?
I. Fewer compute resources required
II. Better utilization of existing capacity
III. Eliminates the need to expand capacity - Correct Answer:II
T/F
Finite scheduling techniques always assign jobs to available capacity on a first-come, first-served
basis. - Correct Answer:False
T/F
The horizontal loading scheduling approach is more likely to result in higher capacity utilization.
- Correct Answer:False
T/F
