CHFM Study Guide Q&A 2024

CHFM Study Guide Q&A 2024 when more than 1 employee works on equipment that must be locked-out in accordance with OSHA regulations, what is an acceptable procedure to follow? - ANS-use a multiple lockout device that allows each individual working on the equipment to apply a personal lock on the energy-isolation device. what contributes to typical general contractor fees? - ANS-permit and inspection fees, general conditions, site conditions assessment fees. demand side management (DSM) programs are developed and offered organizations by energy providers to do which of the following during peak service? - ANS-Monitor the demand for energy supplied by the utility. when developing a preventive maintenance program, a facility manager should ensure that an annual test is conducted on every required battery-powered lighting system. This test should be run for NOT less than: - ANS-30 seconds. in existing facilities, doors that open onto exit corridors should have 1-3/4 inch solid bonded wood core or be of connstruction that resists fire for NOT less than: - ANS-90 minutes. total dissolved solids in a cooling tower are regulated by: - ANS-water temperature. which contracts requires a schedule of values when negotiating? - ANS-vehicle purchase. the most appropriate time for equipment training programs for both maintenance staff and user groups is: - ANS-when equipment is failing due to user error. the Joint Commissions standards require that an organization develop and implement a policy to prohibit smoking except in specified circumstances. The standard is intended to reduce risks of: - ANS- CONTINUES...