Oil Burner Tank - License – Code Exam Questions and Answers

Oil Burner Tank - License – Code Exam Questions and Answers Tanks larger than 10 gallons - Answer ️️ -Supply tank larger than 10 gallons but not larger than 660 show me standard UL 80, you will 2258 or be a secondary containment tank Text larger than 660 gallons - Answer ️️ -Supply text larger than 660 gallon capacity show me provisions of standard UL 142 Tank installation and removal, size - Answer ️️ -Shelby such size and shape that it can be installed and removed from the building as a unit. Tank removal. - Answer ️️ -Any person removing a fuel oil tank from inside of the building for purpose other than replacement or repair shall remove all feed and vent pipes previously connected to tank Shut off valve requirement - Answer ️️ -Shall be provided immediately adjacent to the burner supply connection at the bottom of the supply tank Fill and vent pipe requirements - Answer ️️ -A tank larger than 10 gallons shall be provided with an open vent pipe with a minimum 1 1/4 inch diameter and a fill pipe not larger than the diameter of the vent, both terminating outside the building Aggregate capacity of tanks vent sizing - Answer ️️ -550 gallons or less 1 1/4 inch 551 to 1320 gallons 1 1/2 inch Tank gauge requirement - Answer ️️ -The tank provided with a fill and vent pipe shall be equipped with a gauging device Unused tank openings - Answer ️️ -All unused openings must be closed, vapor tight, by a pipe plug or cap screwed up tightly