EBOLC Demolition Questions with correct answers

Never attach M456 Det Cord, an M151, or an M152 to this component. CORRECT ANSWER M81 An _________ can accommodate and ensure proper proximity for initiating up to 5 shock tubes, 5 M151/152's OR 1 strand of M456 Det Cord. CORRECT ANSWER M9 Holder This component has a high-strength blasting cap, factory-crimped to a 30-ft length of shock tube. It also has a small J-hook for easy attachment to M456 Let Cord, a yellow flag 2 meters from the blasting cap and a red flag 1 meter from the blasting cap. CORRECT ANSWER M11 An _____ has a high-strength blasting cap, factory-crimped to about 7.5 ft length of time fuse that has a 5 minute burn time. CORRECT ANSWER M14 When priming a block of C4 (M112), using M456 Det Cord, what knot is used below freezing? CORRECT ANSWER Uli Knot When priming a block of C4 (M112), using M456 Det Cord, what knot is used above freezing? CORRECT ANSWER Double Overhand Knot This component has a secondary explosive booster crimped onto 10 ft of low-strength Det Cord to allow the user to pre-prime explosives for military operations and bury explosives. It also has a large J-hook for easy attachment to M456 Det Cord. CORRECT ANSWER M151