Va State Inspection Exam Questions and
Answers
Vehicle or a combination of vehicles must be equipped with what type of brake system. - Answer- Parking, holding, or emergency brake.
Reject vehicle if it has what wrong with it - Answer- Missing parts, broken parts, or badly
worn parts
On vehicles equipped with automatic transmission must start in - Answer- Park and neutral
A vehicle that has a manual transmission can't pass inspection if the ____ switch doesn't work - Answer- Safety
The storage battery compartment shall have an opening to provide what - Answer- Ventilation,run off, and space
Who is suppose to drive the vehicle in the inspection lane - Answer- Who ever is doing the inspection
How many wheels are to be removed - Answer- 2
Which wheel should be removed - Answer- 1 in the front and 1 in the back
Why must lug nuts be torqued to the manufactures specification - Answer- To prevent damage to disc rotors
After what date did passenger vehicle no longer have red brake failure warning lamp - Answer- January 1, 1968
Bonded or molded lining or disc pads need to be rejected if less than - Answer- 2/32 inch in thickness
If bonded or riveted brake linings are cracked what must happen - Answer- They have to be rejected
Brake hydraulic system works off of - Answer- Power steering fluid
Answers
Vehicle or a combination of vehicles must be equipped with what type of brake system. - Answer- Parking, holding, or emergency brake.
Reject vehicle if it has what wrong with it - Answer- Missing parts, broken parts, or badly
worn parts
On vehicles equipped with automatic transmission must start in - Answer- Park and neutral
A vehicle that has a manual transmission can't pass inspection if the ____ switch doesn't work - Answer- Safety
The storage battery compartment shall have an opening to provide what - Answer- Ventilation,run off, and space
Who is suppose to drive the vehicle in the inspection lane - Answer- Who ever is doing the inspection
How many wheels are to be removed - Answer- 2
Which wheel should be removed - Answer- 1 in the front and 1 in the back
Why must lug nuts be torqued to the manufactures specification - Answer- To prevent damage to disc rotors
After what date did passenger vehicle no longer have red brake failure warning lamp - Answer- January 1, 1968
Bonded or molded lining or disc pads need to be rejected if less than - Answer- 2/32 inch in thickness
If bonded or riveted brake linings are cracked what must happen - Answer- They have to be rejected
Brake hydraulic system works off of - Answer- Power steering fluid
