Woodshop 2 Exam Questions with Correct Answers

Woodshop 2 Exam Questions with Correct Answers (MITER SAW) Before turning on the ______, check that all cords are out of the way and locking devices are tightened. - Answer-motor (MITER SAW) ______ must be held firmly against the table and fence before starting up the saw. The ends of long boards must be supported level with the table. - Answer-Stock (MITER SAW) Do not move the _____ _____ to see the blade. - Answer-Blade guard (MITER SAW) Make sure the stock will not bind in the ____ during the cut. - Answer-Kerf (MITER SAW) The blade must reach ____ _____ before starting the cut. - Answer-Full speed (MITER SAW) Move the blade _____ and _______ the stock at a controlled pace, then slowly return it to it's starting position. - Answer-Down and through (MITER SAW/TABLE SAW) Maintain a ______ margin of safety - Answer-6 INCH (MITER SAW) Shut off the _____ and wait for it to stop before removing stock or making adjustments. - Answer-Motor (MITER SAW) Keep the table free of dust ______. - Answer-Dust and scraps (BELT/DISC) Be certain the belt or disc is correctly mounted. -The belt must track in the center of the ______. - Do not operate the disc sander if the abrasive paper is loose. - Answer-Drums (BELT/DISC) Check the _______ to see that they are in the correct position of the work, whenever possible. - Answer-Guards and Tables (BELT/DISC) Use the table, _____, and other guides to control the position of the work, whenever possible. - Answer-Fence