ICC Welding Practice Questions & Answers(Graded A+)
Given, a column is 29 feet long. What is the maximum variation in straightness? - ANSWER 0.3625; D1.1 5.23.1 Reference is made to Figure 6.4 in AWS D1.1, 2006. What is the maximum size discontinuity allowed in 3/4" thick complete penetration groove weld ? - ANSWER 1-1/16"; D1.1 F6.4(a) If welding ASTM A913 steel of thickness exceeding 1 1/2 inches (38 mm) without use of preheat, what is the maximum diffusible hydrogen permitted from the filler metal being used? - ANSWER 8ml/100g (H8); D1.1 T3.2 For welding structural steel under AWS D1.1, which welding process does not require qualification testing? - ANSWER SMAW, SAW, GMAC (not -S), FCAW; D1.1 3.2.1 Given: two pieces of 1/4 inch flat bar is to be connected with a lap joint. What is the minimum overlap of material in this stress-carrying lap joint? - ANSWER 1-1/4"; D1.1 2.8.1.2 The specified depth of a welded girder is 36 inches. What is the maximum depth of this member? - ANSWER 36-1/8"; D1.1 5.23.9 For welding reinforcing steel, a welder qualified using #8 (#25) bar, is qualified to weld reinforcing bars - ANSWER #8 and up; D1.4 6.3.2.2 What is the maximum SMAW electrode diameter when welding in the vertical or overhead position, if the WPS is to be prequalified? - ANSWER 3/16"; D1.1 T3.7 When welding sheet steel, the permitted length of undercut of an arc spot weld of 1 inch diameter (25 mm) is - ANSWER pi/8 or 0.39; D1.3 6.1.1.4
Información del documento
- Subido en
- 6 de noviembre de 2023
- Número de páginas
- 17
- Escrito en
- 2023/2024
- Tipo
- Examen
- Contiene
- Preguntas y respuestas
