MSSC - Safety Study Guide 2023/2024

MSSC - Safety Study Guide 2023/2024 customer satisfaction should always be the first objective considered when developing ________ - CORRECT ANSWER-New or improved products a(n) _______ customer is a person or organization that receives services or products in exchange for compensation - CORRECT ANSWER-external The ___________ of the product describes the features required for the product to perform the tasks for which it was intended - CORRECT ANSWER-function Engineers working with manufacturing to become aware of tooling limitations and other problems that may increase production time and cost is an example of __________. - CORRECT ANSWER-concurrent engineering ____________ is a design methodology that designs features into the product that make it cheaper to manufacture while maintaining its ability to perform its intended function - CORRECT ANSWER-Design for Manufacturing and Assembly (DFMA) ___________ must know all the team roles - CORRECT ANSWER-team leader supervisors should set measurable objectives to ___________ - CORRECT ANSWERHave good performance criteria for review of employee performance the first stage in team development process is an awkward stage for the team members called ______________ - CORRECT ANSWER-forming which of the following is not used as a problem analysis tool? - CORRECT ANSWERshipping manifest __________ involves every employee in the company continually looking for ways to improve processes and eliminate wasteful actions - CORRECT ANSWER-continuous improvement A copy of the relevant OSHA standard must be available to workers who attend __________. - CORRECT ANSWER-OSHA required training New and existing employees should receive training/cross-training with an experienced worker __________. - CORRECT ANSWER-So that there is not a shortage of skilled workers due to employee retirement Demonstrating the skills and abilities learned is a common component of a(n) __________. - CORRECT ANSWER-Apprentice program When a new piece of equipment is installed, operators should receive __________ before the machine goes into production. - CORRECT ANSWER-training a ____________ is used to establish a baseline measurement for evaluation of the process - CORRECT ANSWER-metric the specific tasks an employee will be required to perform are described in ____________ - CORRECT ANSWER-job descriptions A training matrix or database that contains a list of employees and their specific skills __________. - CORRECT ANSWER-Should be used to assign people to jobs in areas where they already contain the required skills A good manager will attempt to develop a compromise between two workers who __________. - CORRECT ANSWER-Have developed a conflict when you give positive feedback, always make sure that you are - CORRECT ANSWER-sincere communication skills used by team members should include ___________, oral communication, written comprehension, and listening skills - CORRECT ANSWERwritten communication everyone is responsible for ______ - CORRECT ANSWER-accident prevention The company handbook usually contains policies on a wide variety of topics, including __________. - CORRECT ANSWER-safety regulations OSHA conducts inspections for a number of reasons, which are categorized into four priority levels according to their severity. A Priority 1 indicates __________. - CORRECT ANSWER-Imminent danger - a danger that may cause death or serious physical harm Anyone who notices another employee engaging in an unsafe practice should __________. - CORRECT ANSWER-Give constructive input to the employee to encourage good safety practice which of the following should be done when a new or different machine is installed? - CORRECT ANSWER-Job Safety Analysis OSHA stands for - CORRECT ANSWER-Occupational Safety and Health Administration ________ is the cause of many industrial accidents - CORRECT ANSWERcarelessness if you notice an employee acting in a manner that jeopardizes the safety of others, and you do not feel comfortable approaching that person, you should _______ - CORRECT ANSWER-Report the person to a supervisor immediately an employee should perform an immediate emergency shutdown of their machine and evacuate the building if - CORRECT ANSWER-An evacuation alarm goes off whether or not there is a sign of danger Hearing protection includes ear plugs, canal caps and - CORRECT ANSWER-ear muffs safety glasses with side shields should be used when working with - CORRECT ANSWER-grinding wheel clothing worn to protect against electrical shock must be - CORRECT ANSWER-nonconductive inhalation is the most common way for a(n) _____ to enter the body - CORRECT ANSWER-chemical Before workers work in areas that require __________, they should have a medical exam to determine if they have a pre-existing health problem. - CORRECT ANSWERrespirators the bottom of a ______ respirator presses against the skin between the mouth and chin - CORRECT ANSWER-quarter-mask To check for leaks on a half-mask respirator when inhaling, cover the __________ with the palms of your hands. - CORRECT ANSWER-cartridges OSHA defines air as oxygen-deficient if it contains less than __________ percent oxygen. - CORRECT ANSWER-19.5 ______ are commonly made from leather and designed to go over a welders pants to protect their legs from molten metal or sparks - CORRECT ANSWER-chaps Class G hats are _____ and provide some protection from contact with live electrical circuits. they are tested at 2200 volts - CORRECT ANSWER-non-conductive A class C fire is one that consists of burning __________ - CORRECT ANSWER-live electrical lines or equipment An odor is added to __________ so that it is detected easier. - CORRECT ANSWERnatural gas