FIRE INSPECTOR II QUESTIONS AND ANSWERS

Where would you look to determine if the damper requirements have been included and correct on a set of drawings? - Answer- On the mechanical plan Which plans sheet gives specific details for exit signs? - Answer- Electrical plans Which plan would you look at to find exit door fire ratings? - Answer- Door schedule All of the following items can be verified on the life safety floor plan Except - Answer- The location of fire hydrant connections Which view should inspectors examine to see a horizontal cross section of the complete building from exterior wall to exterior wall and from the foundation to roof - Answer- Sectional view To validate the dimensions on set of construction drawings, you must check the - Answer- Scale Air conditioning systems should be equipped with dampers to? - Answer- Close off sections of the ductwork if a fire is detected Inspection requirements for HVAC systems are found in NFPA - Answer- 90A Following installation, all vents are subject to an inspection and? - Answer- An acceptances performance test Air conditioning systems present unique hazards that include all of the following except - Answer- Flooding According to the national institute of standards and Technology (NIST), a non combustible powerhouse has fire load categorized as - Answer- Slight Fire load in a building is given in - Answer- Pounds per square foot or Newton's Gas cabinets and exhausted enclosures are often used to - Answer- Increase the threshold for areas containing compressed gases In which standard would you find the MAXIMUM allowable qualities of a compressed gas for specific control area - Answer- NFPA 55 Identify the two types of ventilation requirements for all tanks storing flammable and combustible liquids - Answer- Normal / Emergency Storage tanks containing class 1 class 2 class 3A liquids cannot have supports made of - Answer- P