Coating Inspector Level 1 (21-40) EXAM(Answered;graded A+)

When performing tests for oil and grease using an ultra-violet light, the NACE Inspector should be aware that: - Synthetic oil or grease may not be identified To achieve consistently accurate results with ALL alt test equipment - wash your hands before sampling. When holiday testing is required the Inspector is always required to enforce NACE SP 0188: - True If the specifier does not identify a restriction level in accordance with SSPC PA 2, the default restriction level is: - Level 3 Fine cracks in the surface of a coating that rarely reach the substrate are called - checking It is good practice for the NACE Inspector to have instrument calibration certificates available: - At all times In a non-convertible coating the role of the primary solvent is to: - To control the evaporation rate Removal of welds splatter is required: - When specifically identified in the owner's specification Common errors that may produce inaccurate readings when using a Dial-Type Magnetic Pull-Off Dry Filth Thickness (DFT) gauge include: Select All That Apply - Failing to determine the base metal reading (BMR) Rotating the dial too fast when taking measurements Measuring ditty, tacky, or soft filmsConventional spray is a good choice when: - High quality finishes are required