and Answers
The smaller diameter cone of the NOMAD Pro 2, combined with the use of DC power,
and primary shielding greatly reduce a patient X-ray exposure. - True
X-ray locks in NOMAD Pro 2 automatically engage after 2 hours of inactivity. - False
Because NOMAD Pro 2 shielding limits the exposure, it is permissible to have other people
in the exam room during exposures without any precautions. - False
The NOMAD Pro 2 should be routinely cleaned using disinfectant wipes, or some other non acetone cleaner to maintain cleanliness. - True
The backscatter shield is adjustable to accommodate positioning devices and
other special needs but if the backscatter shield is adjusted, additional precautions are required. - True
If the NOMAD Pro 2 has been dropped, it should be returned to Aribex for an evaluation. - True
An exposure can be prematurely terminated for any reason by releasing the trigger at any time during the exposure. - True
The NOMAD Pro 2 should normally be held with two hands for stability whenever possible. - True
The Handset can be left on the Charging Cradle after reaching a full charge without harming the batteries. - True
The Handset should be detached from the NOMAD Pro 2 at the end of each day's use. - True
Radiation safety requires that we establish an in-house radiation protection program that complies with all applicable regulations and addresses precautions for patients and operators who have or may have what medical condition? - Pregnancy
When the NOMAD Pro 2 is powered on and in the settings screen, a single quick pull of the trigger will enable the device. The green LED will illuminate and the display will indicate the device is ENABLING X-RAYS and then the message
will appear on the screen (meaning the next trigger will fire X-rays). - READY
/ Green Radiation Icon