Comptia A+ Certification Practice Test 1 (Exam 220-901) Questions and answers, Rated A+

Comptia A+ Certification Practice Test 1 (Exam 220-901) Questions and answers, Rated A+ Document Content and Description Below Comptia A+ Certification Practice Test 1 (Exam 220-901) Questions and answers, Rated A+ True or False The main functionality of the Basic Input/Output System (BIOS) is to perform the initial hardware checks after the computer is powered on and start up the operating system. - True What two things can be used by an Operating System to communicate with hardware? - Device Drivers System BIOS In modern PCs, the procedure of replacing BIOS contents is sometimes referred to as: - Flashing the BIOS BIOS updates are performed in order to - Fix known programming errors in the current BIOS Repair damaged BIOS Provide support for new types of attached hardware What are the terms that refer to BIOS types that can be updated without removing the BIOS chip from a motherboard? - EEPROM Flash Memory Which Microsoft Windows OS utility can be used to view basic information about computer's BIOS? - MSINFO True or False Power failure during BIOS upgrade can be the cause of irreversible damage to the computer system. - True After a normal system shutdown, when the computer is turned off, contents of the memory used to store BIOS settings are: - Retained What is the acronym that refers to a series of basic hardware diagnostic tests performed by the startup BIOS after the computer is powered on? - POST (Power On Self Test) After replacing a modular hardware component inside computer case, the updated information about specific parameters of the new device can be stored in: - CMOS RAM Flash Memory After completing the initial diagnostics and assigning system resources, the startup BIOS program checks for information about secondary storage devices that might contain the OS. The list of devices and the order in which they should be checked can be found and arranged in the CMOS setup utility, and this option is commonly referred to as: - Boot Sequence In order to work, an integrated component such as Network Interface Card (NIC) on a newly assembled computer system may need to be first: - Enabled in the advanced BIOS settings menu After launching Windows Virtual PC application technician receives error message stating that the Hardware-Assisted Virtualization (HAV) feature is not enabled on the computer. Which of the following steps might help in fixing this problem? - Getting into the CMOS setup utility and enabling the virtualization technology setting The CMOS setup utility can be accessed by pressing: - The key set by the motherboard manufacturer for accessing CMOS setup utility during boot CMOS settings can be set to factory defaults by: - Choosing the default configuration option in the CMOS setup utility Reseating the CMOS battery on the motherboard Using a jumper that can be found on the motherboard Which of the following answers refers to a firmware interface designed as a replacement for BIOS? - UEFI