Networking Basics Test Study Notes;Bits and bytes of
Computer networking with complete solution
1. When data can flow across the cable in both directions this is known as a what
communication?
A. Ethernet
B. Simplex
C. Crosstalk
D. Duplex
Explanation.
When the data can flow across a cable in both directions, this is known as full duplex
communication. Explanation: In a duplex type of topology or communication, data or
information can be transferred in both directions. There are two different types of duplex
communications.
Answer.
D. Duplex.
2. MAC address stands for _____ address?
A. Media access control
B. Message authentication check
C. Maximum allowable cost
D. Memory access controller
Explanation.
MAC Address. Stands for "Media Access Control Address," and no, it is not related
Apple Macintosh computers. A MAC address is a hardware identification number that
uniquely identifies each device on a network.
Answer.
A. Media access control.
3. Something that request data from a server is known as a _______?
A. Switch
B. Router
C. Server
D. Client
Explanation.
Any entity that request data from a centralized node in a network (which is called a
server, because once received a request, it replies sending the requested piece of data
back to the requester) is called a client.
Answer.
D. Client.
, 4. When an electrical pulse on one wire; is accidentally detected on another nearby wire
this is known as a______?
A. Duplex communication
B. Preamble
C. Crosstalk
D. Multicast
Explanation.
when an electrical pulse on one wire is accidentally deleted on another nearby wire, this
is known as Crosswalk. Crosstalk is an electromagnetic interference that is found
running along a circuit.
Answer.
C. Crosstalk.
5. TCP stands for_____?
A. Transmission control protocol
B. Tapioca coconut pudding
C. Translation of career pathway
D. Topical control pathogen
Explanation.
Stands for "Transmission Control Protocol." TCP is a fundamental protocol within the
Internet protocol suite — a collection of standards that allow systems to communicate
over the Internet.Jan
Answer.
A. Transmission control protocol.
6.What layer in the transmission control protocol or internet protocol TCP IP model is
responsible for defining a way to interpret signal so network devices can communicate?
A. Network
B. Transport
C. Application
D. Data link
Explanation.
data link layer
At this layer, we introduce our first protocols. While the physical layer is all about
cabling, connectors and sending signals, the data link layer is responsible for defining a
common way of interpreting these signals, so network devices can communicate.
Answer.
D. Data link.
7. I use as multiple pages open and it isn't email which layer of the transmission control
protocol or internet protocol TCP IP model is responsible for supporting the data to send
email and web pages to the appropriate locations?
Computer networking with complete solution
1. When data can flow across the cable in both directions this is known as a what
communication?
A. Ethernet
B. Simplex
C. Crosstalk
D. Duplex
Explanation.
When the data can flow across a cable in both directions, this is known as full duplex
communication. Explanation: In a duplex type of topology or communication, data or
information can be transferred in both directions. There are two different types of duplex
communications.
Answer.
D. Duplex.
2. MAC address stands for _____ address?
A. Media access control
B. Message authentication check
C. Maximum allowable cost
D. Memory access controller
Explanation.
MAC Address. Stands for "Media Access Control Address," and no, it is not related
Apple Macintosh computers. A MAC address is a hardware identification number that
uniquely identifies each device on a network.
Answer.
A. Media access control.
3. Something that request data from a server is known as a _______?
A. Switch
B. Router
C. Server
D. Client
Explanation.
Any entity that request data from a centralized node in a network (which is called a
server, because once received a request, it replies sending the requested piece of data
back to the requester) is called a client.
Answer.
D. Client.
, 4. When an electrical pulse on one wire; is accidentally detected on another nearby wire
this is known as a______?
A. Duplex communication
B. Preamble
C. Crosstalk
D. Multicast
Explanation.
when an electrical pulse on one wire is accidentally deleted on another nearby wire, this
is known as Crosswalk. Crosstalk is an electromagnetic interference that is found
running along a circuit.
Answer.
C. Crosstalk.
5. TCP stands for_____?
A. Transmission control protocol
B. Tapioca coconut pudding
C. Translation of career pathway
D. Topical control pathogen
Explanation.
Stands for "Transmission Control Protocol." TCP is a fundamental protocol within the
Internet protocol suite — a collection of standards that allow systems to communicate
over the Internet.Jan
Answer.
A. Transmission control protocol.
6.What layer in the transmission control protocol or internet protocol TCP IP model is
responsible for defining a way to interpret signal so network devices can communicate?
A. Network
B. Transport
C. Application
D. Data link
Explanation.
data link layer
At this layer, we introduce our first protocols. While the physical layer is all about
cabling, connectors and sending signals, the data link layer is responsible for defining a
common way of interpreting these signals, so network devices can communicate.
Answer.
D. Data link.
7. I use as multiple pages open and it isn't email which layer of the transmission control
protocol or internet protocol TCP IP model is responsible for supporting the data to send
email and web pages to the appropriate locations?
