CISCO common commands| 80 questions| with complete solutions

enable CORRECT ANSWERS: Logs you into enable mode, which is also known as user exec mode or privileged mode configure terminal CORRECT ANSWERS: Logs you into configuration mode interface fastethernet/number CORRECT ANSWERS: Enters interface configuration mode for the specified fast ethernet interface reload CORRECT ANSWERS: An exec mode command that reboots a Cisco switch or router hostname name CORRECT ANSWERS: Sets a host name to the current Cisco network device copy from-location to-location CORRECT ANSWERS: An enable mode command that copies files from one file location to another copy running-config startup-config CORRECT ANSWERS: An enable mode command that saves the active config, replacing the startup config when a Cisco network device initializes copy startup-config running-config CORRECT ANSWERS: An enable mode command that merges the startup config with the currently active config in RAM write erase erase startup-config CORRECT ANSWERS: An enable mode command that deletes the startup config ip address ip-address mask CORRECT ANSWERS: Assigns an IP address and a subnet mask shutdown no shutdown CORRECT ANSWERS: Used in interface configuration mode. "Shutdown" shuts down the interface, while "no shutdown" brings up the interface. ip default-gateway ip_address CORRECT ANSWERS: Sets the default gateway on a Cisco device show running-config CORRECT ANSWERS: An enable mode command that displays the current configuration description name-string CORRECT ANSWERS: A config interface command to describe or name an interface show running-config interface interface slot/number CORRECT ANSWERS: An enable mode command to display the running configuration for a specific interface