STATE FARM ESTIMATICS EXAM-QUESTIONS AND
ANSWERS
Removal of shingles - ✔estimate for the actual number of squares (not square feet). No
estimating or rounding
Replacement of shingles - ✔a) Include waste in the calculation
-10% - Composite
-15% - wood
b) Round up to the nearest bundle
-Assume 3 bundles per SQ for composite shingles
-Assume 4 bundles per SQ for wood
What do wood shingle estimates always end with? - ✔fourths. .25, .5, .75, .00
What do composite shingle estimates always end with? - ✔thirds. .33, .66, .00
Calculating Hip Roofs - ✔get main body first. extensions second.
Hip roof triangular ends - ✔are calculated when the main roof is calculated b/c a
triangle is accounted for that didn't actually exist
When calculating extensions on a hip roof - ✔don't count for the triangle, but don't
forget the two parrallelograms remaining (there is a good chance they are identical)
When calculating the main body - ✔Don't assume that you can just find one side of a
roof and double it. Why? the rafters might be different lengths
How do you find the height of a hip roof? - ✔the height of the triangle is equal to the
length of the rafter that is forming the parallelogram
(only true if the pitch of the roof is identical and the angles on the hip roof are 90
degrees)
Do you round when removing a roof? - ✔No, removal is always the exact number
What calculations can you use to replace? - ✔x1.10 for composite
x1.15 for wood
.33 for composite
.25 for wood
"drop and roll" - ✔the method for estimating carpet
How wide are carpet rolls? - ✔12 feet
What carpet allowance must you make in estimates? - ✔You must add an additional 3"
for length. If you forget this, then you get the question wrong!
, STATE FARM ESTIMATICS EXAM-QUESTIONS AND
ANSWERS
It is ok to change the way carpet seams are run in a house - ✔False
How do you calculate the removal of carpet - ✔It is the actual square footage
What do Removal of carpet & Replacement of carpet pad have in common? - ✔they
both are the actual square footage
Xactimate doesn't calculate waste on what three things? - ✔Carpet (Not carpet pad),
need to add waste
Shingles
Vinyl sheath flooring
How much square footage is it to move and replace the carpet pad? - ✔The answer:
square footage
To calculate floor removal: - ✔divide up into squares/rectangles and determine specific
amount to be removed
To calculate replacement of floor: - ✔1) notice seams in flooring
2) drop and roll a 12' roll of carpet
3) add 3" to length (.25)
To calculate linear feet of trusses - ✔1) are they installed 24" of center?
2) convert 24" to feet
3) length of roof (30ft) / 2ft = 15 (the number of trusses)
4) Add 1 for the truss not yet accounted for: 30/2 = 15. Then 15 +1 = 16. 16 trusses
How much would it cost to replace the linear feet of truss on this roof? - ✔(total number
of trusses) X (width of roof w/out overhangs) = linear feet of roof trusses
What section of a truss are you using to calculate linear feet? - ✔the bottom
chord...which does not include the overhangs
How thick are stud walls? - ✔4 inches
How do you calculate the painting of walls and ceiling? - ✔You will always have 3
measurements
Baseboards are linear feet - ✔Just add up the length of the walls (openings only matter
if they are larger than 3'0 x 6'8" or 20.01)
Category Code (Xactimate) - ✔similar to trade breakdown (DRY = Drywall, RFG -
roofing, etc.)
ANSWERS
Removal of shingles - ✔estimate for the actual number of squares (not square feet). No
estimating or rounding
Replacement of shingles - ✔a) Include waste in the calculation
-10% - Composite
-15% - wood
b) Round up to the nearest bundle
-Assume 3 bundles per SQ for composite shingles
-Assume 4 bundles per SQ for wood
What do wood shingle estimates always end with? - ✔fourths. .25, .5, .75, .00
What do composite shingle estimates always end with? - ✔thirds. .33, .66, .00
Calculating Hip Roofs - ✔get main body first. extensions second.
Hip roof triangular ends - ✔are calculated when the main roof is calculated b/c a
triangle is accounted for that didn't actually exist
When calculating extensions on a hip roof - ✔don't count for the triangle, but don't
forget the two parrallelograms remaining (there is a good chance they are identical)
When calculating the main body - ✔Don't assume that you can just find one side of a
roof and double it. Why? the rafters might be different lengths
How do you find the height of a hip roof? - ✔the height of the triangle is equal to the
length of the rafter that is forming the parallelogram
(only true if the pitch of the roof is identical and the angles on the hip roof are 90
degrees)
Do you round when removing a roof? - ✔No, removal is always the exact number
What calculations can you use to replace? - ✔x1.10 for composite
x1.15 for wood
.33 for composite
.25 for wood
"drop and roll" - ✔the method for estimating carpet
How wide are carpet rolls? - ✔12 feet
What carpet allowance must you make in estimates? - ✔You must add an additional 3"
for length. If you forget this, then you get the question wrong!
, STATE FARM ESTIMATICS EXAM-QUESTIONS AND
ANSWERS
It is ok to change the way carpet seams are run in a house - ✔False
How do you calculate the removal of carpet - ✔It is the actual square footage
What do Removal of carpet & Replacement of carpet pad have in common? - ✔they
both are the actual square footage
Xactimate doesn't calculate waste on what three things? - ✔Carpet (Not carpet pad),
need to add waste
Shingles
Vinyl sheath flooring
How much square footage is it to move and replace the carpet pad? - ✔The answer:
square footage
To calculate floor removal: - ✔divide up into squares/rectangles and determine specific
amount to be removed
To calculate replacement of floor: - ✔1) notice seams in flooring
2) drop and roll a 12' roll of carpet
3) add 3" to length (.25)
To calculate linear feet of trusses - ✔1) are they installed 24" of center?
2) convert 24" to feet
3) length of roof (30ft) / 2ft = 15 (the number of trusses)
4) Add 1 for the truss not yet accounted for: 30/2 = 15. Then 15 +1 = 16. 16 trusses
How much would it cost to replace the linear feet of truss on this roof? - ✔(total number
of trusses) X (width of roof w/out overhangs) = linear feet of roof trusses
What section of a truss are you using to calculate linear feet? - ✔the bottom
chord...which does not include the overhangs
How thick are stud walls? - ✔4 inches
How do you calculate the painting of walls and ceiling? - ✔You will always have 3
measurements
Baseboards are linear feet - ✔Just add up the length of the walls (openings only matter
if they are larger than 3'0 x 6'8" or 20.01)
Category Code (Xactimate) - ✔similar to trade breakdown (DRY = Drywall, RFG -
roofing, etc.)
