OSHA 30 Construction Test Answer Key FALL HAZARDS ClickSafety Redvector Questions And Answers Latest Update

OSHA 30 Construction Test Answer Key FALL HAZARDS ClickSafety Redvector Three major components of a Personal Fall Arrest System (PFAS) include; anchor and the anchorage connector; full body harness; and: A. Optional body belt B. Connecting device (lanyard with shock absorber/retractable lifeline, snap hooks) C. Anti-jerk cord D. Any of the above - B. Connecting device (lanyard with shock absorber/retractable lifeline, snap hooks) (correct answer) Get OSHA 30 Exam Passed - Every supported scaffold and its components must support, without failure, its own weight and at least _______ the intended load. A. 2 times B. 3 times C. 4 times D. 6 times - C. 4 times (correct answer) Get OSHA 30 Exam Passed - Examples of fall hazards that have resulted in deaths on the jobsite include: A. Falls to the ground or lower levels B. Falls through existing floor or roof openings C. Falls through the floor or roof surface D. Falls on the same level E. All the above - E. All the above (correct answer) Get OSHA 30 Exam Passed - OSHA requires fall protection at different heights for construction and general industry however, regardless of the fall distance, which of the following is most correct? A. Fall protection must be provided when working over dangerous equipment B. Fall protection must be provided when working over dangerous machinery C. Both A and B are correct D. None of the above - C. Both A and B are correct (correct answer) Get OSHA 30 Exam Passed - If there are defects found during the inspection of personal fall protection equipment, or if the equipment has been used in an arrest, it must be: A. Fixed on the spot and tested by twisting the fabric or rope and looking for stress B. Turned in at the end of the shift C. Removed immediately from service D. None of the above - C. Removed immediately from service (correct answer) Get OSHA 30 Exam Passed - How can YOU prevent a fall from a ladder?