design a generic test plan that describes the testing for a system

Test Plan for theArchitectural Prototype: 1. Objectives 1.1 Purpose This document describes the plan for testing the architectural prototype of the C-Registration System. This Test Plan document supports the following objectives: 1.2 Scope This Test Plan describes the integration and system tests that will be conducted on the architectural prototype following integration of the subsystems and components identified in the Integration Build Plan for the Prototype [16]. It is assumed that unit testing already provided thorough black box testing, extensive coverage of source code, and testing of all module interfaces. The purpose of assembling the architectural prototype was to test feasibility and performance of the selected architecture. It is critical that all system and subsystem interfaces be tested as well as system performance at this early stage. Testing of system functionality and features will not be conducted on the prototype. The interfaces between the following subsystems will be tested: The external interfaces to the following devices will be tested: The most critic