OSHA 501 INDUSTRY TRAINER UPDATED SET
QUESTIONS AND ANSWERS SURE A+
✔✔3 Means of safeguarding machinery are - ✔✔Devices
Guards
Location/Distance
✔✔The most severe injury related to abrasive grinding wheel is - ✔✔wheel explosion
✔✔29 CFR 1910.119 Process Safety Management of Highly Hazardous Chemicals,
applies to companies that deal with what quantity of any of the 130 chemicals on the
Toxic/Reactive list, including flammable liquids & gases - ✔✔10,000 lbs & more
✔✔When issued, does abatement require immediate attention then be dealt with over a
planned period of time? - ✔✔Yes, the planned period of time is the time between the
citation date & the due date.
✔✔Legally allowed concentrations of airborne contaminants in the workplace? - ✔✔PEL
Permissible Exposure Limits
✔✔LOTO must be used whenever employees are performing servicing or maintenance
on equipment where they could be injured by unexpected startup or release of stored
energy - ✔✔Yes
✔✔Employers who decide to have employees enter permit required confined spaces
must do what? - ✔✔Have an established, written confined space plan
✔✔In electrical systems, what is the significance of bonding, grounding & speed of
interruption? - ✔✔Permits a circuit to be broken very quickly to avoid electrocution
, ✔✔What is the purpose of the OSHA 300A Form? - ✔✔Form 300A summarizes the
recordable injuries & illnesses & must be signed by the highest ranking corporate
executive
✔✔Above the LFL, vapor will often be capable of burning, but above the UFL, it will
always burn - ✔✔False
✔✔OSHA 300 Form is used for what? - ✔✔Record injuries & illnesses [FROI list]
✔✔OSHA 10 Hour for General Industry - ✔✔Mandatory 7 Hours
1) Intro to OSHA (2 hrs)
2) Walking Working Surfaces (1 hr)
3) Exit Routes, Emergency Plans (1 hr)
4) Electrical (1 hr)
5) PPE (1 hr)
6) Hazard Communication (1 hr)
+ Options (1 hr)
+ 3 or more Electives (30 mins or more)
✔✔OSHA 30 Hour for General Industry - ✔✔Mandatory 13 Hours
1) Intro to OSHA (2 hrs)
2) Managing Safety & Health (2 hrs)
3) Exit Routes (2 hrs)
4) Electrical (2 hrs)
5) Material Handling (2 hrs)
6) Walking Working Surfaces (1 hr)
7) Hazard Communication (1 hr)
+ Electives (10 hrs)
+ Optional (7 hrs)
✔✔OSHA 300A Form should only be posted - ✔✔from Feb 1st to Mar 31st & signed by
the highest ranking Executive on the site
✔✔APF for Respirators - ✔✔Dust Mask APF 10
Half Face Respirator APF 10
Full Face Respirator APF 50 or APF 10
✔✔Industrial Hygiene safe level - ✔✔MUL = PEL x APF = up to 500 per cubic meter
✔✔Floor Hole - ✔✔1 - 12 inches
✔✔Floor Opening - ✔✔greater than 12 inches
✔✔Wall Hole - ✔✔1 - 30 inches tall
QUESTIONS AND ANSWERS SURE A+
✔✔3 Means of safeguarding machinery are - ✔✔Devices
Guards
Location/Distance
✔✔The most severe injury related to abrasive grinding wheel is - ✔✔wheel explosion
✔✔29 CFR 1910.119 Process Safety Management of Highly Hazardous Chemicals,
applies to companies that deal with what quantity of any of the 130 chemicals on the
Toxic/Reactive list, including flammable liquids & gases - ✔✔10,000 lbs & more
✔✔When issued, does abatement require immediate attention then be dealt with over a
planned period of time? - ✔✔Yes, the planned period of time is the time between the
citation date & the due date.
✔✔Legally allowed concentrations of airborne contaminants in the workplace? - ✔✔PEL
Permissible Exposure Limits
✔✔LOTO must be used whenever employees are performing servicing or maintenance
on equipment where they could be injured by unexpected startup or release of stored
energy - ✔✔Yes
✔✔Employers who decide to have employees enter permit required confined spaces
must do what? - ✔✔Have an established, written confined space plan
✔✔In electrical systems, what is the significance of bonding, grounding & speed of
interruption? - ✔✔Permits a circuit to be broken very quickly to avoid electrocution
, ✔✔What is the purpose of the OSHA 300A Form? - ✔✔Form 300A summarizes the
recordable injuries & illnesses & must be signed by the highest ranking corporate
executive
✔✔Above the LFL, vapor will often be capable of burning, but above the UFL, it will
always burn - ✔✔False
✔✔OSHA 300 Form is used for what? - ✔✔Record injuries & illnesses [FROI list]
✔✔OSHA 10 Hour for General Industry - ✔✔Mandatory 7 Hours
1) Intro to OSHA (2 hrs)
2) Walking Working Surfaces (1 hr)
3) Exit Routes, Emergency Plans (1 hr)
4) Electrical (1 hr)
5) PPE (1 hr)
6) Hazard Communication (1 hr)
+ Options (1 hr)
+ 3 or more Electives (30 mins or more)
✔✔OSHA 30 Hour for General Industry - ✔✔Mandatory 13 Hours
1) Intro to OSHA (2 hrs)
2) Managing Safety & Health (2 hrs)
3) Exit Routes (2 hrs)
4) Electrical (2 hrs)
5) Material Handling (2 hrs)
6) Walking Working Surfaces (1 hr)
7) Hazard Communication (1 hr)
+ Electives (10 hrs)
+ Optional (7 hrs)
✔✔OSHA 300A Form should only be posted - ✔✔from Feb 1st to Mar 31st & signed by
the highest ranking Executive on the site
✔✔APF for Respirators - ✔✔Dust Mask APF 10
Half Face Respirator APF 10
Full Face Respirator APF 50 or APF 10
✔✔Industrial Hygiene safe level - ✔✔MUL = PEL x APF = up to 500 per cubic meter
✔✔Floor Hole - ✔✔1 - 12 inches
✔✔Floor Opening - ✔✔greater than 12 inches
✔✔Wall Hole - ✔✔1 - 30 inches tall
