ARIZONA R-44 SHEET METAL CONTRACTOR
EXAM 200 Practice Questions with Verified
Answers & Detailed Rationales
University/Issuing Body: Arizona Registrar of Contractors (ROC) — PSI Testing Services
Course/Exam: R-44 Sheet Metal Contractor (Specialty) License Exam
Professor/Examiner: Arizona Registrar of Contractors Board
Exam Format: Open Book | 75–100 Questions (Actual) / 200 Questions (Practice) | 240 Minutes
| 70% Passing Score
Prerequisite: Minimum 4 Years of Supervisory Trade Experience Within Past 10 Years
Reference Materials:
- SMACNA HVAC Duct Construction Standards — Metal and Flexible, 3rd Edition
- SMACNA Architectural Sheet Metal Manual, 6th Edition
- International Building Code (IBC)
- NRCA Roofing Manual: Steep-slope Roof Systems
- CFR Title 29, Part 1926 (OSHA Safety Standards)
- Sheet Metal, 2nd Edition (Leo Meyer)
- Arizona Administrative Code Title 4, Chapter 9
- Arizona Revised Statutes Title 32, Chapter 10 (ROC Rules)
📚 TABLE OF CONTENTS
| Section | Topic | Questions |
||-|--|
| 1 | Licensing, Regulations & Scope of Work | 1–25 |
| 2 | General Sheet Metal & Materials | 26–55 |
| 3 | Fabrication & Layout | 56–80 |
| 4 | HVAC Ductwork & Systems | 81–105 |
| 5 | Roofing & Architectural Sheet Metal | 106–130 |
| 6 | Tools & Equipment | 131–150 |
| 7 | Installation & Fastening | 151–170 |
| 8 | Blueprint Reading & Estimating | 171–185 |
| 9 | Safety & OSHA | 186–195 |
,| 10 | Business & Contract Law | 196–200 |
SECTION 1: LICENSING, REGULATIONS & SCOPE OF WORK
Questions 1–25
QUESTION 1
According to Arizona Administrative Code R4-9-106, what is the minimum passing grade
required on the R-44 trade examination?
A) 60%
B) 65%
C) 70%
D) 75%
Correct Answer: C — 70%
Rationale: Arizona Administrative Code R4-9-106(C) explicitly states that on each required
examination (both statutes and rules and trade), the qualifying party must receive a grade of at
least 70%. This applies to all specialty contractor exams, including the R-44 Sheet Metal
classification.
QUESTION 2
If a qualifying party fails the R-44 trade examination for the second time, how many calendar
days must they wait before retaking the exam?
A) 7 days
B) 14 days
C) 30 days
D) 90 days
Correct Answer: C — 30 days
Rationale: Candidates who fail the examination must wait 30 calendar days before retaking the
exam. This applies after the second and subsequent failures.
QUESTION 3
Which of the following best describes the scope of work permitted under the Arizona R-44 Sheet
Metal Contractor (Specialty) classification?
,A) Installation of electrical wiring systems
B) Fabrication and installation of sheet metal components including ducts and flashing
C) Plumbing system installation and repair
D) Structural concrete construction
Correct Answer: B — Fabrication and installation of sheet metal components including ducts
and flashing
Rationale: The sheet metal classification allows fabrication and installation of items such as
ducts, flashings, gutters, downspouts, and metal components. Electrical, plumbing, and
structural concrete work are outside this scope.
QUESTION 4
Under Arizona law, who must pass the trade examination for a contracting license?
A) Any employee of the company
B) The "qualifying party" designated by the business entity
C) The company's Chief Financial Officer
D) All project managers employed by the company
Correct Answer: B — The "qualifying party" designated by the business entity
Rationale: The "qualifying party" is the individual designated by a business entity (sole
proprietorship, partnership, corporation, or LLC) who meets the experience and examination
requirements and is responsible for the company's construction activities. This individual must
pass both the Statutes and Rules examination and the appropriate trade examination.
QUESTION 5
Which agency administers the Arizona R-44 Sheet Metal Contractor licensing exam?
A) Arizona Department of Environmental Quality
B) PSI Services LLC
C) The Arizona Registrar of Contractors directly
D) The Department of Labor
Correct Answer: B — PSI Services LLC
Rationale: The Arizona contractor license trade exams are administered by PSI Services, a
third-party testing organization, under contract with the Arizona Registrar of Contractors.
, QUESTION 6
What is the minimum required experience to qualify for the Arizona R-44 Sheet Metal Contractor
examination?
A) 2 years of experience
B) 3 years of experience
C) 4 years of supervisory trade experience within the past 10 years
D) 5 years of experience
Correct Answer: C — 4 years of supervisory trade experience within the past 10 years
Rationale: Applicants must have a minimum of 4 years of verifiable supervisory trade
experience within the past 10 years to qualify for the exam.
QUESTION 7
Which Arizona Revised Statutes chapter governs the licensing requirements for contractors,
including sheet metal contractors?
A) Arizona Revised Statutes Title 32, Chapter 10
B) Arizona Revised Statutes Title 18, Chapter 9
C) Arizona Revised Statutes Title 32, Chapter 3
D) Arizona Revised Statutes Title 28
Correct Answer: A — Arizona Revised Statutes Title 32, Chapter 10
Rationale: Title 32 of the Arizona Revised Statutes governs contractors, with Chapter 10
specifically addressing the Registrar of Contractors.
QUESTION 8
What is the primary role of the Arizona Registrar of Contractors (ROC) regarding sheet metal
contractors?
A) Enforcing environmental regulations
B) Licensing and regulating contractors who perform sheet metal work
C) Issuing building permits
D) Conducting safety inspections
Correct Answer: B — Licensing and regulating contractors who perform sheet metal work
Rationale: The ROC licenses contractors and ensures they meet the qualifications to perform
sheet metal work, while also regulating their business practices to protect the public.
EXAM 200 Practice Questions with Verified
Answers & Detailed Rationales
University/Issuing Body: Arizona Registrar of Contractors (ROC) — PSI Testing Services
Course/Exam: R-44 Sheet Metal Contractor (Specialty) License Exam
Professor/Examiner: Arizona Registrar of Contractors Board
Exam Format: Open Book | 75–100 Questions (Actual) / 200 Questions (Practice) | 240 Minutes
| 70% Passing Score
Prerequisite: Minimum 4 Years of Supervisory Trade Experience Within Past 10 Years
Reference Materials:
- SMACNA HVAC Duct Construction Standards — Metal and Flexible, 3rd Edition
- SMACNA Architectural Sheet Metal Manual, 6th Edition
- International Building Code (IBC)
- NRCA Roofing Manual: Steep-slope Roof Systems
- CFR Title 29, Part 1926 (OSHA Safety Standards)
- Sheet Metal, 2nd Edition (Leo Meyer)
- Arizona Administrative Code Title 4, Chapter 9
- Arizona Revised Statutes Title 32, Chapter 10 (ROC Rules)
📚 TABLE OF CONTENTS
| Section | Topic | Questions |
||-|--|
| 1 | Licensing, Regulations & Scope of Work | 1–25 |
| 2 | General Sheet Metal & Materials | 26–55 |
| 3 | Fabrication & Layout | 56–80 |
| 4 | HVAC Ductwork & Systems | 81–105 |
| 5 | Roofing & Architectural Sheet Metal | 106–130 |
| 6 | Tools & Equipment | 131–150 |
| 7 | Installation & Fastening | 151–170 |
| 8 | Blueprint Reading & Estimating | 171–185 |
| 9 | Safety & OSHA | 186–195 |
,| 10 | Business & Contract Law | 196–200 |
SECTION 1: LICENSING, REGULATIONS & SCOPE OF WORK
Questions 1–25
QUESTION 1
According to Arizona Administrative Code R4-9-106, what is the minimum passing grade
required on the R-44 trade examination?
A) 60%
B) 65%
C) 70%
D) 75%
Correct Answer: C — 70%
Rationale: Arizona Administrative Code R4-9-106(C) explicitly states that on each required
examination (both statutes and rules and trade), the qualifying party must receive a grade of at
least 70%. This applies to all specialty contractor exams, including the R-44 Sheet Metal
classification.
QUESTION 2
If a qualifying party fails the R-44 trade examination for the second time, how many calendar
days must they wait before retaking the exam?
A) 7 days
B) 14 days
C) 30 days
D) 90 days
Correct Answer: C — 30 days
Rationale: Candidates who fail the examination must wait 30 calendar days before retaking the
exam. This applies after the second and subsequent failures.
QUESTION 3
Which of the following best describes the scope of work permitted under the Arizona R-44 Sheet
Metal Contractor (Specialty) classification?
,A) Installation of electrical wiring systems
B) Fabrication and installation of sheet metal components including ducts and flashing
C) Plumbing system installation and repair
D) Structural concrete construction
Correct Answer: B — Fabrication and installation of sheet metal components including ducts
and flashing
Rationale: The sheet metal classification allows fabrication and installation of items such as
ducts, flashings, gutters, downspouts, and metal components. Electrical, plumbing, and
structural concrete work are outside this scope.
QUESTION 4
Under Arizona law, who must pass the trade examination for a contracting license?
A) Any employee of the company
B) The "qualifying party" designated by the business entity
C) The company's Chief Financial Officer
D) All project managers employed by the company
Correct Answer: B — The "qualifying party" designated by the business entity
Rationale: The "qualifying party" is the individual designated by a business entity (sole
proprietorship, partnership, corporation, or LLC) who meets the experience and examination
requirements and is responsible for the company's construction activities. This individual must
pass both the Statutes and Rules examination and the appropriate trade examination.
QUESTION 5
Which agency administers the Arizona R-44 Sheet Metal Contractor licensing exam?
A) Arizona Department of Environmental Quality
B) PSI Services LLC
C) The Arizona Registrar of Contractors directly
D) The Department of Labor
Correct Answer: B — PSI Services LLC
Rationale: The Arizona contractor license trade exams are administered by PSI Services, a
third-party testing organization, under contract with the Arizona Registrar of Contractors.
, QUESTION 6
What is the minimum required experience to qualify for the Arizona R-44 Sheet Metal Contractor
examination?
A) 2 years of experience
B) 3 years of experience
C) 4 years of supervisory trade experience within the past 10 years
D) 5 years of experience
Correct Answer: C — 4 years of supervisory trade experience within the past 10 years
Rationale: Applicants must have a minimum of 4 years of verifiable supervisory trade
experience within the past 10 years to qualify for the exam.
QUESTION 7
Which Arizona Revised Statutes chapter governs the licensing requirements for contractors,
including sheet metal contractors?
A) Arizona Revised Statutes Title 32, Chapter 10
B) Arizona Revised Statutes Title 18, Chapter 9
C) Arizona Revised Statutes Title 32, Chapter 3
D) Arizona Revised Statutes Title 28
Correct Answer: A — Arizona Revised Statutes Title 32, Chapter 10
Rationale: Title 32 of the Arizona Revised Statutes governs contractors, with Chapter 10
specifically addressing the Registrar of Contractors.
QUESTION 8
What is the primary role of the Arizona Registrar of Contractors (ROC) regarding sheet metal
contractors?
A) Enforcing environmental regulations
B) Licensing and regulating contractors who perform sheet metal work
C) Issuing building permits
D) Conducting safety inspections
Correct Answer: B — Licensing and regulating contractors who perform sheet metal work
Rationale: The ROC licenses contractors and ensures they meet the qualifications to perform
sheet metal work, while also regulating their business practices to protect the public.
