AME Questions with CORRECT Answers

AME Questions with CORRECT Answers

Question:
What is the force of turning effort required to apply tension to a fastener assembly
Measurements of Torque Foot pounds
Answer:
Torque


Question:
2 kinds of Torque Wrenches Micrometer
Answer:
Inch pounds


Question:
2 different kinds of Torque for a Micrometer
Answer:
Preset desired torque -release lock, rotate grip to desired torque, relock handle


Question:
Dial Indicating is _______ prior to using and may be turned in _________ direction for
applying torque
Answer:
Zero, Either direction


Question:
Calibration is not reliable at extreme ends of the torque range, so the required torque
should between what percentages of the wrench range
Answer:
30% to 80%


Question:
What are the 2 calibration requirements
Answer:
Scheduled Intervals -specified in calibration data

, Question:
What is the process of securing all aircraft bolts, nuts, turnbuckles, cap screws, studs,
and all other fasteners to prevent loosening by vibration
Answer:
Hardware securing


Question:
2 types of Hardware Securing methods
Answer:
Safety Wire


Question:
Common sizes of the Safety Wire 0.032
Answer:
Cotter Pins


Question:
Both styles of the Safety Wire Single Wire
Answer:
0.020


Question:
Both styles of the Safety Wire Single Wire
Answer:
-used in hard to reach areas


Question:
what
Answer:
Diameter


Question:
Safety Precautions of Torque Wrenches
Answer:
Always pull towards you, never push