FSD Fire Alarm Response Checklist Exam QUESTIONS AND CORRECT ANSWERS

FSD Fire Alarm Response Checklist Exam
QUESTIONS AND CORRECT ANSWERS
FIRE ALARM RESPONSE CHECKLIST: Step 1 - CORRECT ANSWER Report to Fire
Command Station.

Secure the FCS and determine the status/location of the alarm



FIRE ALARM RESPONSE CHECKLIST: step 2 - CORRECT ANSWER Acknowledge the
alarm. (Silence "LOCAL ALARM" and document the alarm location.)



FIRE ALARM RESPONSE CHECKLIST: step 3 - CORRECT ANSWER Are there any other
alarms?

Scroll down panel to determine if any other devices have activated.



FIRE ALARM RESPONSE CHECKLIST: step 4 - CORRECT ANSWER Dispatch the Fire
Brigade...

...and send to floor below fire floor and instruct brigade to open communications and advise of status.



FIRE ALARM RESPONSE CHECKLIST: step 5 - CORRECT ANSWER Manual C/O Trip

If panel is equipped, manually activate C/O Trip switch to initiate alarm signal to Central Station.



FIRE ALARM RESPONSE CHECKLIST: step 6 - CORRECT ANSWER Notify FDNY - 911
Call

Call 911 in event alarm panel is unknowingly in "OFF LINE" status. Confirm FDNY is enroute.



FIRE ALARM RESPONSE CHECKLIST: step 7 - CORRECT ANSWER Make "All Call"
Announcement

Initiate "ALL CALL" announcement using appropriate "Fire Announcement" script as necessary.



FIRE ALARM RESPONSE CHECKLIST: step 8 - CORRECT ANSWER Confirm elevators
are in Phase I recall.

If not, recall manually using 2642 key at elevator call button panel. Leave key in cylinder.