NASCLA Accredited Commercial General
Building Contractor Exam Practice
Questions And Correct
Answers (Verified Answers) Plus
Rationale 2026 Q&A| Instant Download
Pdf
1. Which of the following best describes the primary purpose of the
NASCLA Accredited Examination for Commercial General Building
Contractors?
A) To certify specialized trade craftsmanship skills in a single construction
discipline
B) To replace all local building permit requirements across participating
states
C) To assess general contractor competency for multi-state licensing
reciprocity
D) To provide a standardized licensing examination accepted by multiple
state licensing boards for commercial general building contractors
The NASCLA exam is designed as a standardized, nationally recognized
assessment that allows contractors to demonstrate general building
,knowledge for use in multiple participating jurisdictions, supporting
licensing reciprocity rather than replacing local regulatory requirements.
2. The NASCLA Commercial General Building Contractor exam is best
characterized as:
A) Hands-on performance testing in a construction field environment
B) Oral board examination conducted by state inspectors
C) A closed-book, code memorization test
D) A multiple-choice, open-book computer-based examination
The exam is administered in a multiple-choice format on a computer and is
open-book, meaning candidates may reference approved materials during
the test.
3. Approximately how many scored questions are included in the NASCLA
Commercial General Building Contractor exam?
A) 75
B) 90
C) 105
D) 115
The exam typically contains about 115 scored multiple-choice questions,
with additional unscored pilot questions possibly included for testing
development purposes.
4. What is the standard passing requirement for the NASCLA Commercial
General Building Contractor exam?
A) 60% correct
B) 65% correct
C) 75% correct
D) Approximately 70% correct (around 81 correct answers out of 115)
, Candidates must generally achieve about 70% accuracy, which translates
to roughly 81 correct responses depending on the exam version.
5. How long is the typical time allowed for completing the NASCLA
Commercial General Building Contractor exam?
A) 3 hours
B) 4 hours
C) 5 hours
D) Approximately 5 hours and 30 minutes (about 330 minutes)
The exam is time-limited to roughly 5.5 hours, requiring efficient
navigation of reference materials due to the open-book format.
6. Which organization is primarily responsible for developing and
maintaining the NASCLA Accredited Examination Program?
A) OSHA
B) ICC
C) PSI Services
D) NASCLA (National Association of State Contractors Licensing Agencies)
NASCLA develops and oversees the accredited examination program in
cooperation with state licensing boards and subject matter experts.
7. Which of the following best describes the exam’s testing philosophy?
A) Emphasis on memorizing code books verbatim
B) Focus on physical construction skill demonstration
C) Emphasis on state-specific licensing law only
D) Emphasis on applying construction management knowledge using
reference materials
The exam evaluates a contractor’s ability to apply knowledge, interpret
references, and manage commercial construction projects rather than
memorize information.
Building Contractor Exam Practice
Questions And Correct
Answers (Verified Answers) Plus
Rationale 2026 Q&A| Instant Download
1. Which of the following best describes the primary purpose of the
NASCLA Accredited Examination for Commercial General Building
Contractors?
A) To certify specialized trade craftsmanship skills in a single construction
discipline
B) To replace all local building permit requirements across participating
states
C) To assess general contractor competency for multi-state licensing
reciprocity
D) To provide a standardized licensing examination accepted by multiple
state licensing boards for commercial general building contractors
The NASCLA exam is designed as a standardized, nationally recognized
assessment that allows contractors to demonstrate general building
,knowledge for use in multiple participating jurisdictions, supporting
licensing reciprocity rather than replacing local regulatory requirements.
2. The NASCLA Commercial General Building Contractor exam is best
characterized as:
A) Hands-on performance testing in a construction field environment
B) Oral board examination conducted by state inspectors
C) A closed-book, code memorization test
D) A multiple-choice, open-book computer-based examination
The exam is administered in a multiple-choice format on a computer and is
open-book, meaning candidates may reference approved materials during
the test.
3. Approximately how many scored questions are included in the NASCLA
Commercial General Building Contractor exam?
A) 75
B) 90
C) 105
D) 115
The exam typically contains about 115 scored multiple-choice questions,
with additional unscored pilot questions possibly included for testing
development purposes.
4. What is the standard passing requirement for the NASCLA Commercial
General Building Contractor exam?
A) 60% correct
B) 65% correct
C) 75% correct
D) Approximately 70% correct (around 81 correct answers out of 115)
, Candidates must generally achieve about 70% accuracy, which translates
to roughly 81 correct responses depending on the exam version.
5. How long is the typical time allowed for completing the NASCLA
Commercial General Building Contractor exam?
A) 3 hours
B) 4 hours
C) 5 hours
D) Approximately 5 hours and 30 minutes (about 330 minutes)
The exam is time-limited to roughly 5.5 hours, requiring efficient
navigation of reference materials due to the open-book format.
6. Which organization is primarily responsible for developing and
maintaining the NASCLA Accredited Examination Program?
A) OSHA
B) ICC
C) PSI Services
D) NASCLA (National Association of State Contractors Licensing Agencies)
NASCLA develops and oversees the accredited examination program in
cooperation with state licensing boards and subject matter experts.
7. Which of the following best describes the exam’s testing philosophy?
A) Emphasis on memorizing code books verbatim
B) Focus on physical construction skill demonstration
C) Emphasis on state-specific licensing law only
D) Emphasis on applying construction management knowledge using
reference materials
The exam evaluates a contractor’s ability to apply knowledge, interpret
references, and manage commercial construction projects rather than
memorize information.
