RAMSAY MAINTENANCE TEST STUDYGUIDE
EXAM(ACTUAL EXAM) WITH CORRECT ACTUAL
QUESTIONS AND CORRECTLY WELL DEFINED
ANSWERS LATEST ALREADY GRADED A+ 2026
Save
Terms in this set (132)
The best way to protect a pressure D. using a snubber with the gauge.
gauge from pressure surges is by
A. installing a shutoff valve.
B. disconnecting the gauge.
C. installing a plug valve.
D. using a snubber with the gauge.
Hydraulic lines should NEVER be A. galvanized pipe.
constructed of
A. galvanized pipe.
B. Teflon-lined hose.
C. tubing.
D. black steel pipe.
The purpose of a bypass line B. allow passage of flow in case of emergency.
around a system filter is to
A. regulate pressure.
B. allow passage of flow in case of
emergency.
C. offer less resistance to flow than
bushings.
D. require less space than bushings.
,If a cylinder has an input pressure D. 250 lbs.
of 50 psi and the BLANK SIDE of
the piston is 5 sq. inches, how much
total force is applied by the piston?
A. 5 lbs.
B. 10 lbs.
C. 50 lbs.
D. 250 lbs.
A 40% pressure drop across an oil C. screen is dirty.
filter screen indicates that the
A. screen is broken.
B. line pressure is too low.
C. screen is dirty.
D. line pressure is too high.
An air-breather is installed on a C. vent the reservoir.
fluid reservoir to
A. allow overflow.
B. cool the oil.
C. vent the reservoir.
D. control air pollution.
, Which best describes the piston B. Unequal
surface area of a single-rod,
double-acting piston?
A. Spring-loaded
B. Unequal
C. Equal
D. Balanced
What kind of valve allows flow in B. Check
only one direction?
A. Needle
B. Check
C. Gate
D. Globe
Pressure on a fluid is B. distributed equally in the fluid.
A. higher at the inlet.
B. distributed equally in the fluid.
C. lower than input pressure.
D. higher than input pressure.
Shutting the fluid discharge of an C. overstroke.
air-operated reciprocating pump
will cause the pump to
A. reverse direction.
B. lift the relief valve.
C. overstroke.
D. stall.
The main difference between B. require return lines.
pneumatic cylinders and hydraulic
cylinders is that hydraulic cylinders
A. are more easily repaired.
B. require return lines.
C. are lighter in weight.
D. have a greater size selection.
EXAM(ACTUAL EXAM) WITH CORRECT ACTUAL
QUESTIONS AND CORRECTLY WELL DEFINED
ANSWERS LATEST ALREADY GRADED A+ 2026
Save
Terms in this set (132)
The best way to protect a pressure D. using a snubber with the gauge.
gauge from pressure surges is by
A. installing a shutoff valve.
B. disconnecting the gauge.
C. installing a plug valve.
D. using a snubber with the gauge.
Hydraulic lines should NEVER be A. galvanized pipe.
constructed of
A. galvanized pipe.
B. Teflon-lined hose.
C. tubing.
D. black steel pipe.
The purpose of a bypass line B. allow passage of flow in case of emergency.
around a system filter is to
A. regulate pressure.
B. allow passage of flow in case of
emergency.
C. offer less resistance to flow than
bushings.
D. require less space than bushings.
,If a cylinder has an input pressure D. 250 lbs.
of 50 psi and the BLANK SIDE of
the piston is 5 sq. inches, how much
total force is applied by the piston?
A. 5 lbs.
B. 10 lbs.
C. 50 lbs.
D. 250 lbs.
A 40% pressure drop across an oil C. screen is dirty.
filter screen indicates that the
A. screen is broken.
B. line pressure is too low.
C. screen is dirty.
D. line pressure is too high.
An air-breather is installed on a C. vent the reservoir.
fluid reservoir to
A. allow overflow.
B. cool the oil.
C. vent the reservoir.
D. control air pollution.
, Which best describes the piston B. Unequal
surface area of a single-rod,
double-acting piston?
A. Spring-loaded
B. Unequal
C. Equal
D. Balanced
What kind of valve allows flow in B. Check
only one direction?
A. Needle
B. Check
C. Gate
D. Globe
Pressure on a fluid is B. distributed equally in the fluid.
A. higher at the inlet.
B. distributed equally in the fluid.
C. lower than input pressure.
D. higher than input pressure.
Shutting the fluid discharge of an C. overstroke.
air-operated reciprocating pump
will cause the pump to
A. reverse direction.
B. lift the relief valve.
C. overstroke.
D. stall.
The main difference between B. require return lines.
pneumatic cylinders and hydraulic
cylinders is that hydraulic cylinders
A. are more easily repaired.
B. require return lines.
C. are lighter in weight.
D. have a greater size selection.
