CT - F-2 UNLIMITED JOURNEYPERSON (FIRE SPRINKLER) |
FINAL EXAM PREP 2026/2027 | QUESTIONS AND 100%
VERIFIED ANSWERS | 100% PASS GUARANTEE
1. What is the primary purpose of an automatic fire sprinkler system?
A. To increase water pressure
B. To detect gas leaks
C. To control or suppress fires
D. To cool building interiors
ANSWER : C. To control or suppress fires
Explanation: Fire sprinkler systems are designed to control, contain, or
suppress fires by discharging water directly onto the fire area, reducing heat
and limiting property damage.
2. Which organization publishes NFPA 13?
A. OSHA
B. National Fire Protection Association
C. EPA
D. FEMA
ANSWER : B. National Fire Protection Association
Explanation: NFPA 13, Standard for the Installation of Sprinkler Systems, is
published by the National Fire Protection Association and serves as the primary
installation standard.
3. What type of sprinkler system contains water in the piping at all times?
A. Dry pipe system
,B. Deluge system
C. Preaction system
D. Wet pipe system
ANSWER : D. Wet pipe system
Explanation: Wet pipe systems keep water in the piping continuously, allowing
immediate discharge when a sprinkler activates.
4. Which sprinkler system uses compressed air or nitrogen in the pipes?
A. Wet pipe system
B. Dry pipe system
C. Deluge system
D. Standpipe system
ANSWER : B. Dry pipe system
Explanation: Dry pipe systems use compressed air or nitrogen to keep water
out of the pipes until a sprinkler opens.
5. What causes an individual sprinkler head to activate?
A. Smoke detection
B. Manual alarm activation
C. High temperature at the sprinkler
D. Water pressure changes
ANSWER : C. High temperature at the sprinkler
Explanation: Sprinklers activate individually when heat reaches the
temperature rating of the heat-sensitive element.
6. What is the most common sprinkler orientation?
A. Upright
B. Horizontal
C. Diagonal
D. Flexible
,ANSWER : A. Upright
Explanation: Upright sprinklers are among the most commonly installed
sprinkler types and are designed for exposed piping systems.
7. What color liquid typically indicates a standard-temperature sprinkler?
A. Blue
B. Green
C. Orange or red
D. Black
ANSWER : C. Orange or red
Explanation: Standard-temperature sprinklers often use orange or red liquid-
filled bulbs to indicate their temperature classification.
8. Which document establishes occupational safety requirements for
construction workers?
A. NFPA 25
B. OSHA regulations
C. NFPA 20
D. NEC
ANSWER : B. OSHA regulations
Explanation: OSHA establishes workplace safety standards covering
construction activities, fall protection, and personal protective equipment.
9. What is the function of a fire department connection?
A. Drain the system
B. Increase air pressure
C. Supply supplemental water
D. Test alarms
ANSWER : C. Supply supplemental water
Explanation: Fire department connections allow firefighters to pump water
into sprinkler or standpipe systems.
, 10.Which valve controls water flow into a sprinkler system?
A. Check valve
B. Control valve
C. Relief valve
D. Air valve
ANSWER : B. Control valve
Explanation: Control valves isolate sections of sprinkler systems for
maintenance and emergency shutdown.
11.What is the minimum personal protective equipment required on most
job sites?
A. Gloves only
B. Safety glasses only
C. Hard hat, safety glasses, and work boots
D. Hearing protection only
ANSWER : C. Hard hat, safety glasses, and work boots
Explanation: Most construction sites require hard hats, eye protection, and
protective footwear.
12.Which sprinkler system releases water from all open sprinklers
simultaneously?
A. Wet pipe
B. Dry pipe
C. Deluge
D. Standpipe
ANSWER : C. Deluge
Explanation: Deluge systems use open sprinklers and discharge water through
all outlets when activated.
13.What does a check valve do?
A. Stops backflow
FINAL EXAM PREP 2026/2027 | QUESTIONS AND 100%
VERIFIED ANSWERS | 100% PASS GUARANTEE
1. What is the primary purpose of an automatic fire sprinkler system?
A. To increase water pressure
B. To detect gas leaks
C. To control or suppress fires
D. To cool building interiors
ANSWER : C. To control or suppress fires
Explanation: Fire sprinkler systems are designed to control, contain, or
suppress fires by discharging water directly onto the fire area, reducing heat
and limiting property damage.
2. Which organization publishes NFPA 13?
A. OSHA
B. National Fire Protection Association
C. EPA
D. FEMA
ANSWER : B. National Fire Protection Association
Explanation: NFPA 13, Standard for the Installation of Sprinkler Systems, is
published by the National Fire Protection Association and serves as the primary
installation standard.
3. What type of sprinkler system contains water in the piping at all times?
A. Dry pipe system
,B. Deluge system
C. Preaction system
D. Wet pipe system
ANSWER : D. Wet pipe system
Explanation: Wet pipe systems keep water in the piping continuously, allowing
immediate discharge when a sprinkler activates.
4. Which sprinkler system uses compressed air or nitrogen in the pipes?
A. Wet pipe system
B. Dry pipe system
C. Deluge system
D. Standpipe system
ANSWER : B. Dry pipe system
Explanation: Dry pipe systems use compressed air or nitrogen to keep water
out of the pipes until a sprinkler opens.
5. What causes an individual sprinkler head to activate?
A. Smoke detection
B. Manual alarm activation
C. High temperature at the sprinkler
D. Water pressure changes
ANSWER : C. High temperature at the sprinkler
Explanation: Sprinklers activate individually when heat reaches the
temperature rating of the heat-sensitive element.
6. What is the most common sprinkler orientation?
A. Upright
B. Horizontal
C. Diagonal
D. Flexible
,ANSWER : A. Upright
Explanation: Upright sprinklers are among the most commonly installed
sprinkler types and are designed for exposed piping systems.
7. What color liquid typically indicates a standard-temperature sprinkler?
A. Blue
B. Green
C. Orange or red
D. Black
ANSWER : C. Orange or red
Explanation: Standard-temperature sprinklers often use orange or red liquid-
filled bulbs to indicate their temperature classification.
8. Which document establishes occupational safety requirements for
construction workers?
A. NFPA 25
B. OSHA regulations
C. NFPA 20
D. NEC
ANSWER : B. OSHA regulations
Explanation: OSHA establishes workplace safety standards covering
construction activities, fall protection, and personal protective equipment.
9. What is the function of a fire department connection?
A. Drain the system
B. Increase air pressure
C. Supply supplemental water
D. Test alarms
ANSWER : C. Supply supplemental water
Explanation: Fire department connections allow firefighters to pump water
into sprinkler or standpipe systems.
, 10.Which valve controls water flow into a sprinkler system?
A. Check valve
B. Control valve
C. Relief valve
D. Air valve
ANSWER : B. Control valve
Explanation: Control valves isolate sections of sprinkler systems for
maintenance and emergency shutdown.
11.What is the minimum personal protective equipment required on most
job sites?
A. Gloves only
B. Safety glasses only
C. Hard hat, safety glasses, and work boots
D. Hearing protection only
ANSWER : C. Hard hat, safety glasses, and work boots
Explanation: Most construction sites require hard hats, eye protection, and
protective footwear.
12.Which sprinkler system releases water from all open sprinklers
simultaneously?
A. Wet pipe
B. Dry pipe
C. Deluge
D. Standpipe
ANSWER : C. Deluge
Explanation: Deluge systems use open sprinklers and discharge water through
all outlets when activated.
13.What does a check valve do?
A. Stops backflow
