Grand Central 201 Admin EXAM (2026) UPDATE Verified Questions And
Answers | With 100% Correct Answers graded A+ Guaranteed Success!!
Create and Configure Facility Structure: Configure departments to show the Hospital Accounts form -
(ANSWER)These settings are found in Hyperspace > Registration/Grand Central System Definitions >
Service Area > Hospital Account Settings. By clicking Dept Settings and selecting the departments, it sets
an item in the department record.
Which of the following units require the Unit Type Field to be set? - (ANSWER)Hospital OutPatient - Unit
Type is required for any of the specialty units listed in the options, such as Hospital Outpatient. If this
setting is blank for certain specialty units, they won't fully function.
Create and Configure Facility Structure: Configure a bed to show pertinent information to bed planners -
(ANSWER)In Bed Board: Always include
This bed will appear in Bed Planning whether it is occupied or unoccupied.
In Census: Yes
This bed is included in census statistics reporting.
Create and Configure Facility Structure: Attaching two revenue locations to the same parent revenue
location can allow them to share hospital accounts across revenue locations - (ANSWER)True
Create and Configure Facility Structure: On which screen in the department master file can you specify
that the department is an HOD? - (ANSWER)ADT Unit/Department Settings
Unit Type: Hospital Outpatient.
Create and Configure Facility Structure:
An organization has one service area with several hospitals. Hospital A and B need a setting configured
one way. Hospital C, Hospital D, Hospital E, and Hospital F need the same setting configured a different
way. This setting is available at the department, revenue location, service area, and facility levels. Given
this information, which records should you edit to configure the settings that all hospitals get what they
need? Configure the setting in the fewest number of records possible. Choose ALL answers that apply.
A. Hospital A-B
B. Hospital C-F
C. The service area
,Grand Central 201 Admin EXAM (2026) UPDATE Verified Questions And
Answers | With 100% Correct Answers graded A+ Guaranteed Success!!
D. The facility - (ANSWER)D. The facility (for the majority's setting) and A. Hospital A-B (for the
overrides). Though SA could be an option, it would be best if it is set at the most general level (Facility) in
case the organization creates new service areas so that it will NOT need to be reset at that additional
service area.
Create and Configure Facility Structure:
The parent revenue location is the lowest level of the facility structure for reporting for hospital billing
AR, payments, adjustments and refunds. - (ANSWER)True
Create and Configure Facility Structure:
List the setting that determines where a unit appears in Bed Administration - (ANSWER)If you leave the
Parent Hospital/ Clinic Area field blank, you won't find your unit in Bed Administration, a Hyperspace
tool used to build and maintain rooms and beds
Grand Central Settings Overview: Define the rule of specificity - (ANSWER)If a setting is configured at
multiple levels of the setting's hierarchy, the system uses the most specific level's setting. If nothing is set
at that level, the system looks to the next most specific level's setting.
Facility (MORE GENERAL)
Service Area
Revenue Location
Department/Units (MOST SPECIFIC)
Unit Managers: Identify the type of record that controls highlighting on unit managers - (ANSWER)VIEW
RECORD
Unit Managers: Configure the unit manager to display specific beds. - (ANSWER)Care Area
The care area determines which beds and patients a Unit Manager shows. It also determines what
options appear to users when they right-click a bed or patient.
, Grand Central 201 Admin EXAM (2026) UPDATE Verified Questions And
Answers | With 100% Correct Answers graded A+ Guaranteed Success!!
Unit Managers: Identify where View records records are used - (ANSWER)They are used in the Unit
Manager Configuration
Unit Managers: Manager Configuration - (ANSWER)The manager configuration is the Unit Manager itself.
It determines which units (DEP) should be managed in the Unit Manager. It contains care areas and
views.
Unit Managers: Which of the following care area types require a view record to be set with the care area.
A. Patient and Beds
B. Pending in coming Transfers
C. Rooms Only
D. Pending Admissions - (ANSWER)B. Pending Incoming Transfers
D. Pending Admission
Pending Admission and Pending Incoming Transfers care areas require the View Field. Care area that
represent rooms and bed do not require this field, and can use the "Default View for bedded Patient
Care Area" set at the Manager Configuration level if left blank.
Unit Managers:
What does the Care Area content field in a care area configuration determine? Choose ALL that apply.
A. If the care area will show patients and beds.
B. If the care area will show pending admissions.
C. If the care area will show pending incoming transfers.
D. If the care area will show pending discharges. - (ANSWER)a. If the care area will show patients and
beds.
b. If the care area will show pending admissions.
c. If the care area will show pending incoming transfers.
Unit Managers:
Answers | With 100% Correct Answers graded A+ Guaranteed Success!!
Create and Configure Facility Structure: Configure departments to show the Hospital Accounts form -
(ANSWER)These settings are found in Hyperspace > Registration/Grand Central System Definitions >
Service Area > Hospital Account Settings. By clicking Dept Settings and selecting the departments, it sets
an item in the department record.
Which of the following units require the Unit Type Field to be set? - (ANSWER)Hospital OutPatient - Unit
Type is required for any of the specialty units listed in the options, such as Hospital Outpatient. If this
setting is blank for certain specialty units, they won't fully function.
Create and Configure Facility Structure: Configure a bed to show pertinent information to bed planners -
(ANSWER)In Bed Board: Always include
This bed will appear in Bed Planning whether it is occupied or unoccupied.
In Census: Yes
This bed is included in census statistics reporting.
Create and Configure Facility Structure: Attaching two revenue locations to the same parent revenue
location can allow them to share hospital accounts across revenue locations - (ANSWER)True
Create and Configure Facility Structure: On which screen in the department master file can you specify
that the department is an HOD? - (ANSWER)ADT Unit/Department Settings
Unit Type: Hospital Outpatient.
Create and Configure Facility Structure:
An organization has one service area with several hospitals. Hospital A and B need a setting configured
one way. Hospital C, Hospital D, Hospital E, and Hospital F need the same setting configured a different
way. This setting is available at the department, revenue location, service area, and facility levels. Given
this information, which records should you edit to configure the settings that all hospitals get what they
need? Configure the setting in the fewest number of records possible. Choose ALL answers that apply.
A. Hospital A-B
B. Hospital C-F
C. The service area
,Grand Central 201 Admin EXAM (2026) UPDATE Verified Questions And
Answers | With 100% Correct Answers graded A+ Guaranteed Success!!
D. The facility - (ANSWER)D. The facility (for the majority's setting) and A. Hospital A-B (for the
overrides). Though SA could be an option, it would be best if it is set at the most general level (Facility) in
case the organization creates new service areas so that it will NOT need to be reset at that additional
service area.
Create and Configure Facility Structure:
The parent revenue location is the lowest level of the facility structure for reporting for hospital billing
AR, payments, adjustments and refunds. - (ANSWER)True
Create and Configure Facility Structure:
List the setting that determines where a unit appears in Bed Administration - (ANSWER)If you leave the
Parent Hospital/ Clinic Area field blank, you won't find your unit in Bed Administration, a Hyperspace
tool used to build and maintain rooms and beds
Grand Central Settings Overview: Define the rule of specificity - (ANSWER)If a setting is configured at
multiple levels of the setting's hierarchy, the system uses the most specific level's setting. If nothing is set
at that level, the system looks to the next most specific level's setting.
Facility (MORE GENERAL)
Service Area
Revenue Location
Department/Units (MOST SPECIFIC)
Unit Managers: Identify the type of record that controls highlighting on unit managers - (ANSWER)VIEW
RECORD
Unit Managers: Configure the unit manager to display specific beds. - (ANSWER)Care Area
The care area determines which beds and patients a Unit Manager shows. It also determines what
options appear to users when they right-click a bed or patient.
, Grand Central 201 Admin EXAM (2026) UPDATE Verified Questions And
Answers | With 100% Correct Answers graded A+ Guaranteed Success!!
Unit Managers: Identify where View records records are used - (ANSWER)They are used in the Unit
Manager Configuration
Unit Managers: Manager Configuration - (ANSWER)The manager configuration is the Unit Manager itself.
It determines which units (DEP) should be managed in the Unit Manager. It contains care areas and
views.
Unit Managers: Which of the following care area types require a view record to be set with the care area.
A. Patient and Beds
B. Pending in coming Transfers
C. Rooms Only
D. Pending Admissions - (ANSWER)B. Pending Incoming Transfers
D. Pending Admission
Pending Admission and Pending Incoming Transfers care areas require the View Field. Care area that
represent rooms and bed do not require this field, and can use the "Default View for bedded Patient
Care Area" set at the Manager Configuration level if left blank.
Unit Managers:
What does the Care Area content field in a care area configuration determine? Choose ALL that apply.
A. If the care area will show patients and beds.
B. If the care area will show pending admissions.
C. If the care area will show pending incoming transfers.
D. If the care area will show pending discharges. - (ANSWER)a. If the care area will show patients and
beds.
b. If the care area will show pending admissions.
c. If the care area will show pending incoming transfers.
Unit Managers:
