CCT Test Bank 2026 | Latest Update | Graded A+
1. After you start your Windows 7 computer in the morning, you attempt to
access your organization's network to open an inventory program, but you
don't seem to be able to make a network connection. Which of the following
commands enables you to test your computer's ability to connect to the
network?
ping
listen
find net
net test
2. If a network administrator needs to update the running configuration with
changes made in the startup configuration after a device reboot, which
command should they use?
copy running-config tftp
copy startup-config running-config
copy tftp running-config
copy running-config startup-config
copy tftp startup-config
3. Describe the significance of the configuration register value in Cisco devices.
The configuration register value is irrelevant to device operations.
The configuration register value determines how the device boots
and its configuration settings.
, The configuration register value controls the speed of the Ethernet
connection.
The configuration register value is used to set the IP address of the
device.
4. If a network administrator needs to configure a router remotely and is
concerned about security, which protocol should they use and why?
They should avoid remote access altogether for security reasons.
They should use SSH because it encrypts the connection, ensuring
secure communication.
They can use either protocol since both are equally secure.
They should use Telnet because it is easier to configure.
5. If a user is unable to connect to a website, which command should they use
in the cmd interface to check if the website's server is reachable?
ping
tracert
netstat
ipconfig
6. Describe the role of DRAM in a Cisco device's operation.
DRAM permanently stores the IOS and configuration files.
DRAM is not used in Cisco devices.
DRAM is used solely for booting the device.
DRAM temporarily stores the decompressed IOS and the running
configuration for quick access.
,7. Which command-line interface is used in Windows to run network diagnostic
commands?
Control Panel
cmd
Terminal
PowerShell
8. Which of the answers listed below refers to a secure replacement for Telnet?
FTP (File Transfer Protocol)
CHAP (Challenge-Handshake Authentication Protocol)
SNMP (Simple Network Management Protocol)
SSH (Secure Shell)
9. If a network administrator needs to check the available storage options
before saving a configuration file on a Cisco device, which command should
they use?
copy running-config startup-config
show interfaces
ping 192.168.1.1
show file system
10. If a network administrator wants to change the boot sequence of a Cisco
router, which command should they use to view the current configuration
register setting?
show running-config
show version
, boot system
configure terminal
11. What is the purpose of the command 'copy tftp flash' in Cisco devices?
To copy a Cisco IOS image from a TFTP server to the device's flash
memory.
To copy a configuration file from the device to a TFTP server.
To back up the device's flash memory to NVRAM.
To update the device's firmware using a USB drive.
12. Describe the process and significance of using the 'copy tftp flash' command
in network device management.
The command is used to delete files from the device's flash memory
to free up space.
This command is used to display the current IOS version running on
the device.
It is a command that configures the device's network settings for TFTP
access.
The 'copy tftp flash' command transfers the IOS image from a TFTP
server to the device's flash memory, which is essential for updating
or restoring the operating system.
13. What command can you use to test connectivity with an IP address?
ping
ipconfig
All of the above
1. After you start your Windows 7 computer in the morning, you attempt to
access your organization's network to open an inventory program, but you
don't seem to be able to make a network connection. Which of the following
commands enables you to test your computer's ability to connect to the
network?
ping
listen
find net
net test
2. If a network administrator needs to update the running configuration with
changes made in the startup configuration after a device reboot, which
command should they use?
copy running-config tftp
copy startup-config running-config
copy tftp running-config
copy running-config startup-config
copy tftp startup-config
3. Describe the significance of the configuration register value in Cisco devices.
The configuration register value is irrelevant to device operations.
The configuration register value determines how the device boots
and its configuration settings.
, The configuration register value controls the speed of the Ethernet
connection.
The configuration register value is used to set the IP address of the
device.
4. If a network administrator needs to configure a router remotely and is
concerned about security, which protocol should they use and why?
They should avoid remote access altogether for security reasons.
They should use SSH because it encrypts the connection, ensuring
secure communication.
They can use either protocol since both are equally secure.
They should use Telnet because it is easier to configure.
5. If a user is unable to connect to a website, which command should they use
in the cmd interface to check if the website's server is reachable?
ping
tracert
netstat
ipconfig
6. Describe the role of DRAM in a Cisco device's operation.
DRAM permanently stores the IOS and configuration files.
DRAM is not used in Cisco devices.
DRAM is used solely for booting the device.
DRAM temporarily stores the decompressed IOS and the running
configuration for quick access.
,7. Which command-line interface is used in Windows to run network diagnostic
commands?
Control Panel
cmd
Terminal
PowerShell
8. Which of the answers listed below refers to a secure replacement for Telnet?
FTP (File Transfer Protocol)
CHAP (Challenge-Handshake Authentication Protocol)
SNMP (Simple Network Management Protocol)
SSH (Secure Shell)
9. If a network administrator needs to check the available storage options
before saving a configuration file on a Cisco device, which command should
they use?
copy running-config startup-config
show interfaces
ping 192.168.1.1
show file system
10. If a network administrator wants to change the boot sequence of a Cisco
router, which command should they use to view the current configuration
register setting?
show running-config
show version
, boot system
configure terminal
11. What is the purpose of the command 'copy tftp flash' in Cisco devices?
To copy a Cisco IOS image from a TFTP server to the device's flash
memory.
To copy a configuration file from the device to a TFTP server.
To back up the device's flash memory to NVRAM.
To update the device's firmware using a USB drive.
12. Describe the process and significance of using the 'copy tftp flash' command
in network device management.
The command is used to delete files from the device's flash memory
to free up space.
This command is used to display the current IOS version running on
the device.
It is a command that configures the device's network settings for TFTP
access.
The 'copy tftp flash' command transfers the IOS image from a TFTP
server to the device's flash memory, which is essential for updating
or restoring the operating system.
13. What command can you use to test connectivity with an IP address?
ping
ipconfig
All of the above
