MICHIGAN SOS BRAKES MECHANIC CERTIFICATION | COMPLETE
QUESTIONS WITH 100% RATED EXPERT SOLUTIONS |2026 LATEST
UPDATED
Warped brake rotors - (answer)A likely cause of the brake pedal slowly going to the floor when
normal braking pressure is applied.
Contaminated brake fluid - (answer)A possible reason for the brake pedal slowly going to the
floor under normal braking pressure.
Internal leak in the master cylinder - (answer)A common cause for the brake pedal going to the
floor when normal braking pressure is applied.
Faulty brake booster - (answer)A potential issue that could cause the brake pedal to slowly go to
the floor during a road test.
Vacuum power brake booster test - (answer)To test it, disconnect the vacuum hose and observe
engine idle.
, Brake pedal pumping test - (answer)Pump the brake pedal at least 4 times, hold the brake pedal
depressed, and start the engine to test the vacuum power brake booster.
Parking brake application - (answer)Apply the parking brake and start the engine as part of the
vacuum power brake booster test.
Vacuum check at the booster - (answer)Check for vacuum at the booster with a gauge to test the
vacuum power brake booster.
Depressurizing an ABS system - (answer)The proper way includes opening the bleeder valves.
Disconnecting the ABS fuse - (answer)A method to depressurize an ABS system.
Pumping the brake pedal - (answer)Pump the brake pedal at least 25 times with the ignition off to
depressurize an ABS system.
ABS self-diagnostic test - (answer)Running this test is one way to depressurize an ABS system.
QUESTIONS WITH 100% RATED EXPERT SOLUTIONS |2026 LATEST
UPDATED
Warped brake rotors - (answer)A likely cause of the brake pedal slowly going to the floor when
normal braking pressure is applied.
Contaminated brake fluid - (answer)A possible reason for the brake pedal slowly going to the
floor under normal braking pressure.
Internal leak in the master cylinder - (answer)A common cause for the brake pedal going to the
floor when normal braking pressure is applied.
Faulty brake booster - (answer)A potential issue that could cause the brake pedal to slowly go to
the floor during a road test.
Vacuum power brake booster test - (answer)To test it, disconnect the vacuum hose and observe
engine idle.
, Brake pedal pumping test - (answer)Pump the brake pedal at least 4 times, hold the brake pedal
depressed, and start the engine to test the vacuum power brake booster.
Parking brake application - (answer)Apply the parking brake and start the engine as part of the
vacuum power brake booster test.
Vacuum check at the booster - (answer)Check for vacuum at the booster with a gauge to test the
vacuum power brake booster.
Depressurizing an ABS system - (answer)The proper way includes opening the bleeder valves.
Disconnecting the ABS fuse - (answer)A method to depressurize an ABS system.
Pumping the brake pedal - (answer)Pump the brake pedal at least 25 times with the ignition off to
depressurize an ABS system.
ABS self-diagnostic test - (answer)Running this test is one way to depressurize an ABS system.
