COLORADO CONSTRUCTION HEALTH AND SAFETY
TECHNICIAN EXAM QUESTIONS AND CORRECT
ANSWERS (VERIFIED ANSWERS) Q&A 2026
|INSTANT DOWNLOAD PDF
1. What is the primary purpose of OSHA regulations in
construction?
A. Increase project speed
B. Reduce construction costs
C. Ensure worker safety and health
D. Improve equipment design
Rationale: OSHA standards are designed to prevent workplace
injuries, illnesses, and fatalities by enforcing safe work
practices.
Correct Answer: C
2. Which PPE is required to protect against falling objects on a
construction site?
A. Safety glasses
B. Hard hat
C. Ear plugs
D. Respirator
,Rationale: Hard hats are specifically designed to protect the
head from impact and falling debris.
Correct Answer: B
3. What does a “red tag” on equipment typically indicate?
A. Equipment is ready for use
B. Equipment is under repair or unsafe
C. Equipment is newly installed
D. Equipment is energy efficient
Rationale: A red tag warns that equipment is unsafe and must
not be used.
Correct Answer: B
4. What is the safe maximum slope for a ladder placed against
a structure?
A. 1:1
B. 1:2
C. 4:1
D. 10:1
Rationale: OSHA recommends a 4:1 ratio for ladder placement
to ensure stability.
Correct Answer: C
5. Which hazard is most associated with confined spaces?
,A. Excess lighting
B. Oxygen deficiency
C. Noise pollution
D. Heat stress only
Rationale: Confined spaces may contain low oxygen levels or
toxic gases.
Correct Answer: B
6. What is the first step before starting excavation work?
A. Install shoring
B. Notify OSHA
C. Call utility location services
D. Begin digging manually
Rationale: Underground utilities must be identified to prevent
strikes and accidents.
Correct Answer: C
7. Which fire extinguisher class is used for electrical fires?
A. Class A
B. Class B
C. Class C
D. Class D
, Rationale: Class C extinguishers are designed for energized
electrical equipment.
Correct Answer: C
8. What is the main risk of working on scaffolding without
guardrails?
A. Noise exposure
B. Chemical exposure
C. Fall hazards
D. Heat exhaustion
Rationale: Falls are the leading cause of death in construction
scaffolding work.
Correct Answer: C
9. What should be done first when a worker is exposed to
electrical shock?
A. Move the victim immediately
B. Turn off the power source
C. Give water
D. Apply ice
Rationale: The power source must be shut off to prevent
ongoing injury.
Correct Answer: B
TECHNICIAN EXAM QUESTIONS AND CORRECT
ANSWERS (VERIFIED ANSWERS) Q&A 2026
|INSTANT DOWNLOAD PDF
1. What is the primary purpose of OSHA regulations in
construction?
A. Increase project speed
B. Reduce construction costs
C. Ensure worker safety and health
D. Improve equipment design
Rationale: OSHA standards are designed to prevent workplace
injuries, illnesses, and fatalities by enforcing safe work
practices.
Correct Answer: C
2. Which PPE is required to protect against falling objects on a
construction site?
A. Safety glasses
B. Hard hat
C. Ear plugs
D. Respirator
,Rationale: Hard hats are specifically designed to protect the
head from impact and falling debris.
Correct Answer: B
3. What does a “red tag” on equipment typically indicate?
A. Equipment is ready for use
B. Equipment is under repair or unsafe
C. Equipment is newly installed
D. Equipment is energy efficient
Rationale: A red tag warns that equipment is unsafe and must
not be used.
Correct Answer: B
4. What is the safe maximum slope for a ladder placed against
a structure?
A. 1:1
B. 1:2
C. 4:1
D. 10:1
Rationale: OSHA recommends a 4:1 ratio for ladder placement
to ensure stability.
Correct Answer: C
5. Which hazard is most associated with confined spaces?
,A. Excess lighting
B. Oxygen deficiency
C. Noise pollution
D. Heat stress only
Rationale: Confined spaces may contain low oxygen levels or
toxic gases.
Correct Answer: B
6. What is the first step before starting excavation work?
A. Install shoring
B. Notify OSHA
C. Call utility location services
D. Begin digging manually
Rationale: Underground utilities must be identified to prevent
strikes and accidents.
Correct Answer: C
7. Which fire extinguisher class is used for electrical fires?
A. Class A
B. Class B
C. Class C
D. Class D
, Rationale: Class C extinguishers are designed for energized
electrical equipment.
Correct Answer: C
8. What is the main risk of working on scaffolding without
guardrails?
A. Noise exposure
B. Chemical exposure
C. Fall hazards
D. Heat exhaustion
Rationale: Falls are the leading cause of death in construction
scaffolding work.
Correct Answer: C
9. What should be done first when a worker is exposed to
electrical shock?
A. Move the victim immediately
B. Turn off the power source
C. Give water
D. Apply ice
Rationale: The power source must be shut off to prevent
ongoing injury.
Correct Answer: B
