Adhesive Anchor Training Exam | 2026/2027
Edition | Real Exam Questions with 100%
Verified Correct Answers
Adhesive Anchor Installation and Inspection Assessment | Expert-Verified Q&A |
Certification-Ready Format
Introduction
This Adhesive Anchor Training actual exam 2026/2027 delivers a comprehensive, expert-verified
Evaluation covering all adhesive anchor installation and inspection domains required for
structural fastening certification. The assessment integrates critical competencies in epoxy and
adhesive material properties, concrete surface preparation, precise drilling and cleaning
techniques, proper injection and curing processes, and quality assurance inspection to ensure
structural integrity and code compliance in construction applications. All 50 questions include
100% verified correct answers with detailed rationales, designed for accurate Evaluation and
certification-ready performance under the 2026/2027 Adhesive Anchor Training curriculum.
Content Area Overview – Adhesive Anchor Training 2026/2027
Content Area Questions Key Topics Weight
Adhesive Anchor 1-10 (10) Epoxy, vinyl ester, 20%
Fundamentals & ACI 318 Ch.17, bond
Material Properties strength, temperature
classes, shelf life
Surface Preparation, 11-22 (12) Hammer drill, core 25%
Drilling & Hole drill, hole diameter,
Cleaning dust removal, blow-
brush-blow, moisture
condition
Installation 23-35 (13) Cartridge 25%
Procedures, Injection conditioning,
& Curing injection technique,
embedment depth,
gel time, cure time,
overhead installation
Inspection, Testing, & 36-45 (10) Special inspection, 20%
Quality Assurance torque verification,
proof loading, ACI
355.4, bond failure
modes
Safety, Building 46-50 (5) PPE, SDS, ACI 318-19 10%
Codes & ICC-ES/ACI Ch.17, ICC-ES ESR,
Standards IBC compliance,
installer certification
, Examination Questions – 50 Verified Questions | Adhesive Anchor Training
2026/2027
Domain: Adhesive Anchor Fundamentals & Material Properties
20% – Questions 1-10
1. Which adhesive chemistry provides the highest long-term bond strength and
temperature resistance for structural adhesive anchors in cracked concrete?
A. Acrylic
B. Pure epoxy
C. Polyester
D. Cement grout
Correct Answer: B
Rationale: Pure epoxy systems offer superior bond strength, creep resistance, and elevated
temperature performance, qualified under ACI 355.4 for cracked concrete structural
applications.
2. Per ACI 318 Chapter 17, adhesive anchors are classified as:
A. Cast-in-place only
B. Post-installed bonded anchors
C. Mechanical expansion anchors
D. Powder-actuated fasteners
Correct Answer: B
Rationale: ACI 318-19 Chapter 17 defines adhesive anchors as post-installed bonded anchors
relying on chemical bond between adhesive, steel, and concrete.
3. What is the primary function of an adhesive anchor system?
A. Decorative fastening
B. Transfer tensile and shear loads from steel element to concrete via chemical bond
C. Electrical grounding only
D. Thermal insulation
Correct Answer: B
Rationale: Adhesive anchors transfer structural tension and shear loads through chemical
bond interface, evaluated per ACI 355.4.
4. Which temperature class per ICC-ES AC308 requires evaluation at sustained
elevated temperature?
A. Temperature Class A
B. Temperature Class B
C. Temperature Class C long-term
D. Ambient only
Correct Answer: C
Rationale: ICC-ES AC308 Temperature Class C addresses long-term sustained elevated
temperature exposure, critical for adhesive performance verification.
5. What is the typical shelf life verification requirement for adhesive anchor
cartridges on a 2026/2027 jobsite?
A. No expiration check needed
Edition | Real Exam Questions with 100%
Verified Correct Answers
Adhesive Anchor Installation and Inspection Assessment | Expert-Verified Q&A |
Certification-Ready Format
Introduction
This Adhesive Anchor Training actual exam 2026/2027 delivers a comprehensive, expert-verified
Evaluation covering all adhesive anchor installation and inspection domains required for
structural fastening certification. The assessment integrates critical competencies in epoxy and
adhesive material properties, concrete surface preparation, precise drilling and cleaning
techniques, proper injection and curing processes, and quality assurance inspection to ensure
structural integrity and code compliance in construction applications. All 50 questions include
100% verified correct answers with detailed rationales, designed for accurate Evaluation and
certification-ready performance under the 2026/2027 Adhesive Anchor Training curriculum.
Content Area Overview – Adhesive Anchor Training 2026/2027
Content Area Questions Key Topics Weight
Adhesive Anchor 1-10 (10) Epoxy, vinyl ester, 20%
Fundamentals & ACI 318 Ch.17, bond
Material Properties strength, temperature
classes, shelf life
Surface Preparation, 11-22 (12) Hammer drill, core 25%
Drilling & Hole drill, hole diameter,
Cleaning dust removal, blow-
brush-blow, moisture
condition
Installation 23-35 (13) Cartridge 25%
Procedures, Injection conditioning,
& Curing injection technique,
embedment depth,
gel time, cure time,
overhead installation
Inspection, Testing, & 36-45 (10) Special inspection, 20%
Quality Assurance torque verification,
proof loading, ACI
355.4, bond failure
modes
Safety, Building 46-50 (5) PPE, SDS, ACI 318-19 10%
Codes & ICC-ES/ACI Ch.17, ICC-ES ESR,
Standards IBC compliance,
installer certification
, Examination Questions – 50 Verified Questions | Adhesive Anchor Training
2026/2027
Domain: Adhesive Anchor Fundamentals & Material Properties
20% – Questions 1-10
1. Which adhesive chemistry provides the highest long-term bond strength and
temperature resistance for structural adhesive anchors in cracked concrete?
A. Acrylic
B. Pure epoxy
C. Polyester
D. Cement grout
Correct Answer: B
Rationale: Pure epoxy systems offer superior bond strength, creep resistance, and elevated
temperature performance, qualified under ACI 355.4 for cracked concrete structural
applications.
2. Per ACI 318 Chapter 17, adhesive anchors are classified as:
A. Cast-in-place only
B. Post-installed bonded anchors
C. Mechanical expansion anchors
D. Powder-actuated fasteners
Correct Answer: B
Rationale: ACI 318-19 Chapter 17 defines adhesive anchors as post-installed bonded anchors
relying on chemical bond between adhesive, steel, and concrete.
3. What is the primary function of an adhesive anchor system?
A. Decorative fastening
B. Transfer tensile and shear loads from steel element to concrete via chemical bond
C. Electrical grounding only
D. Thermal insulation
Correct Answer: B
Rationale: Adhesive anchors transfer structural tension and shear loads through chemical
bond interface, evaluated per ACI 355.4.
4. Which temperature class per ICC-ES AC308 requires evaluation at sustained
elevated temperature?
A. Temperature Class A
B. Temperature Class B
C. Temperature Class C long-term
D. Ambient only
Correct Answer: C
Rationale: ICC-ES AC308 Temperature Class C addresses long-term sustained elevated
temperature exposure, critical for adhesive performance verification.
5. What is the typical shelf life verification requirement for adhesive anchor
cartridges on a 2026/2027 jobsite?
A. No expiration check needed
