NYC Ironworker Exam Practice
Questions And Correct Answers
(Verified Answers) Plus Rationale 2026
Q&A| Instant Download Pdf
1. An ironworker assigned to unload structural steel from a delivery truck
notices that several bundles appear unstable and are not properly
secured. What should the ironworker do first?
A. Climb onto the load and begin unfastening chains immediately
B. Signal the truck driver to move the vehicle closer to the crane
C. Verify that the load is stabilized and that unloading procedures are
followed before removing securement devices
D. Cut all securement straps simultaneously to save time
C. Verify that the load is stabilized and that unloading procedures are
followed before removing securement devices
,Rationale: Proper load stabilization prevents unexpected shifting, rolling,
or collapse of steel members during unloading. Removing securement
devices before confirming stability can create serious crushing and struck-
by hazards.
2. During steel erection operations, who has primary responsibility for
following established site safety procedures?
A. Only the site superintendent
B. Only the crane operator
C. Every worker on the project
D. Only the safety manager
C. Every worker on the project
Rationale: Construction safety depends upon the participation of all
workers. Each employee is responsible for complying with safety
requirements and helping maintain a safe work environment.
3. Which hazard is most commonly associated with structural steel
erection activities?
A. Noise exposure only
B. Fall hazards
C. Sunburn
D. Insect bites
,B. Fall hazards
Rationale: Falls are among the leading causes of injuries and fatalities in
steel erection. Ironworkers routinely work at elevated heights where
proper fall protection is critical.
4. Before using a personal fall arrest system, an ironworker should:
A. Inspect all components for damage and defects
B. Assume equipment is safe if used yesterday
C. Use only the lanyard and leave the harness behind
D. Modify equipment for comfort
A. Inspect all components for damage and defects
Rationale: Regular inspection helps identify worn, damaged, or defective
equipment before use. Damaged fall protection equipment may fail during
a fall event.
5. What is the primary purpose of a tag line during hoisting operations?
A. To increase crane lifting capacity
B. To control load movement and rotation
C. To replace hand signals
D. To secure workers to the load
B. To control load movement and rotation
, Rationale: Tag lines help workers maintain control of suspended loads,
reducing the risk of uncontrolled swinging and contact with personnel or
structures.
6. A competent person on a steel erection project is generally responsible
for:
A. Identifying hazards and taking corrective action
B. Performing payroll duties
C. Operating every crane
D. Purchasing all tools
A. Identifying hazards and taking corrective action
Rationale: A competent person has the knowledge and authority necessary
to recognize hazards and implement measures to eliminate or control
them.
7. When should an ironworker wear appropriate eye protection?
A. Only during welding
B. Only during grinding
C. Whenever eye hazards are present
D. Only when instructed by visitors
C. Whenever eye hazards are present
Questions And Correct Answers
(Verified Answers) Plus Rationale 2026
Q&A| Instant Download Pdf
1. An ironworker assigned to unload structural steel from a delivery truck
notices that several bundles appear unstable and are not properly
secured. What should the ironworker do first?
A. Climb onto the load and begin unfastening chains immediately
B. Signal the truck driver to move the vehicle closer to the crane
C. Verify that the load is stabilized and that unloading procedures are
followed before removing securement devices
D. Cut all securement straps simultaneously to save time
C. Verify that the load is stabilized and that unloading procedures are
followed before removing securement devices
,Rationale: Proper load stabilization prevents unexpected shifting, rolling,
or collapse of steel members during unloading. Removing securement
devices before confirming stability can create serious crushing and struck-
by hazards.
2. During steel erection operations, who has primary responsibility for
following established site safety procedures?
A. Only the site superintendent
B. Only the crane operator
C. Every worker on the project
D. Only the safety manager
C. Every worker on the project
Rationale: Construction safety depends upon the participation of all
workers. Each employee is responsible for complying with safety
requirements and helping maintain a safe work environment.
3. Which hazard is most commonly associated with structural steel
erection activities?
A. Noise exposure only
B. Fall hazards
C. Sunburn
D. Insect bites
,B. Fall hazards
Rationale: Falls are among the leading causes of injuries and fatalities in
steel erection. Ironworkers routinely work at elevated heights where
proper fall protection is critical.
4. Before using a personal fall arrest system, an ironworker should:
A. Inspect all components for damage and defects
B. Assume equipment is safe if used yesterday
C. Use only the lanyard and leave the harness behind
D. Modify equipment for comfort
A. Inspect all components for damage and defects
Rationale: Regular inspection helps identify worn, damaged, or defective
equipment before use. Damaged fall protection equipment may fail during
a fall event.
5. What is the primary purpose of a tag line during hoisting operations?
A. To increase crane lifting capacity
B. To control load movement and rotation
C. To replace hand signals
D. To secure workers to the load
B. To control load movement and rotation
, Rationale: Tag lines help workers maintain control of suspended loads,
reducing the risk of uncontrolled swinging and contact with personnel or
structures.
6. A competent person on a steel erection project is generally responsible
for:
A. Identifying hazards and taking corrective action
B. Performing payroll duties
C. Operating every crane
D. Purchasing all tools
A. Identifying hazards and taking corrective action
Rationale: A competent person has the knowledge and authority necessary
to recognize hazards and implement measures to eliminate or control
them.
7. When should an ironworker wear appropriate eye protection?
A. Only during welding
B. Only during grinding
C. Whenever eye hazards are present
D. Only when instructed by visitors
C. Whenever eye hazards are present
