Pure Storage Implementation Specialist Updated Exam 2026 WITH
Recent Newest Verified And Well Analyzed Exam Questions (Actual
Exam 2026-2027) Correct Detailed & Verified ANSWERS (100%
Accurate Solutions) ALREADY GRADED A+||NEWEST VERSION Of The
Exam Guarantee Pass!!
When do chastity services need to be restarted?
A. Purity 5.3.0+
B. Purity below 5.3.0
C. All Purity versions -ANSWER-B. Purity below 5.3.0
What is the default configuration of an X50R3-FC array?
A - 4-port FC card in Slot 0 with 16GB optics
B - 4-port FC card in Slot 0 with 32GB optics
C - 4=port FC card in slot 2 with 16GB optics -ANSWER-A - 4-port FC card in Slot 0
with 16GB optics
What is the Default config of //X70R3-FC array?
A - 4-port 16/32 FC card with 16GB optics in Slot 0 and 2-port 16/32GB card with
16GB optics in slot 2
B - 4-port 16/32 FC card with 16GB optics in Slot 0 and 2-port 16/32GB card with
16GB optics in slot 1
C - 4-port 16/32 FC card with 16GB optics in Slot 0 -ANSWER-A - 4-port 16/32 FC
card with 16GB optics in Slot 0 and 2-port 16/32GB card with 16GB optics in slot 2
What ports are added when you upgrade from //M50 to //X50?
,A - ETH 3/4
B - ETH 4/5
C - ETH 6/7 -ANSWER-B - ETH 4/5
During an upgrade, you installed the new controller which has newer version than
the version running on array. What do you do?
A. Upgrade/downgrade version on new controller to match running version
B. Upgrade array to new version
C. Abort upgrade and call support -ANSWER-A. Upgrade/downgrade version on
new controller to match running version
Customer wants a newer version than what shipped. What do you do?
A. Install with current version, have Pure Support upgrade version to desired
B. Download the PPKG and SHA1 to USB and install
C. Call Pure Support -ANSWER-B. Download PPKG and SHA1 to USB and install
IWB has IP with mask 255.255.255.233 and default gateway 10.48.24.1. How
should you fix?
A. Set mask to /23
B. Set mask to 255.255.255.0
C. Change default gateway to 10.48.24.233 -ANSWER-B. Set mask to
255.255.255.0
Smtp reply has outlook.microsoft.com:587 which is not working. How do you fix?
A. Remove the port number
B. Prepend https
, C. Put in credentials -ANSWER-C. Put in credentials
What are requirements for a FA name? ("123" failed as a name)
A - Must be alphanumeric
B - Cannot start with a digit
C - Need to be 4 character long -ANSWER-B - Cannot start with a digit
For a Controller upgrade -when do you put on sticker for new model?
A. After upgrade complete
B. Doesn't matter
C. After 1st controller installed -ANSWER-A. After upgrade is complete
What is the command to check if SAS is supported?
A - purehw list --type controller --all
B - purehw list -type -controller -all
C - purehw list --type --controller all -ANSWER-A - purehw list --type controller --
all
For a controller upgrade, when do you set/apply tunables?
A. Before the controller upgrade
B. After upgrade is complete
C. When installing the first controller
D. When installing each controller -ANSWER-D. When installing each controller
Recent Newest Verified And Well Analyzed Exam Questions (Actual
Exam 2026-2027) Correct Detailed & Verified ANSWERS (100%
Accurate Solutions) ALREADY GRADED A+||NEWEST VERSION Of The
Exam Guarantee Pass!!
When do chastity services need to be restarted?
A. Purity 5.3.0+
B. Purity below 5.3.0
C. All Purity versions -ANSWER-B. Purity below 5.3.0
What is the default configuration of an X50R3-FC array?
A - 4-port FC card in Slot 0 with 16GB optics
B - 4-port FC card in Slot 0 with 32GB optics
C - 4=port FC card in slot 2 with 16GB optics -ANSWER-A - 4-port FC card in Slot 0
with 16GB optics
What is the Default config of //X70R3-FC array?
A - 4-port 16/32 FC card with 16GB optics in Slot 0 and 2-port 16/32GB card with
16GB optics in slot 2
B - 4-port 16/32 FC card with 16GB optics in Slot 0 and 2-port 16/32GB card with
16GB optics in slot 1
C - 4-port 16/32 FC card with 16GB optics in Slot 0 -ANSWER-A - 4-port 16/32 FC
card with 16GB optics in Slot 0 and 2-port 16/32GB card with 16GB optics in slot 2
What ports are added when you upgrade from //M50 to //X50?
,A - ETH 3/4
B - ETH 4/5
C - ETH 6/7 -ANSWER-B - ETH 4/5
During an upgrade, you installed the new controller which has newer version than
the version running on array. What do you do?
A. Upgrade/downgrade version on new controller to match running version
B. Upgrade array to new version
C. Abort upgrade and call support -ANSWER-A. Upgrade/downgrade version on
new controller to match running version
Customer wants a newer version than what shipped. What do you do?
A. Install with current version, have Pure Support upgrade version to desired
B. Download the PPKG and SHA1 to USB and install
C. Call Pure Support -ANSWER-B. Download PPKG and SHA1 to USB and install
IWB has IP with mask 255.255.255.233 and default gateway 10.48.24.1. How
should you fix?
A. Set mask to /23
B. Set mask to 255.255.255.0
C. Change default gateway to 10.48.24.233 -ANSWER-B. Set mask to
255.255.255.0
Smtp reply has outlook.microsoft.com:587 which is not working. How do you fix?
A. Remove the port number
B. Prepend https
, C. Put in credentials -ANSWER-C. Put in credentials
What are requirements for a FA name? ("123" failed as a name)
A - Must be alphanumeric
B - Cannot start with a digit
C - Need to be 4 character long -ANSWER-B - Cannot start with a digit
For a Controller upgrade -when do you put on sticker for new model?
A. After upgrade complete
B. Doesn't matter
C. After 1st controller installed -ANSWER-A. After upgrade is complete
What is the command to check if SAS is supported?
A - purehw list --type controller --all
B - purehw list -type -controller -all
C - purehw list --type --controller all -ANSWER-A - purehw list --type controller --
all
For a controller upgrade, when do you set/apply tunables?
A. Before the controller upgrade
B. After upgrade is complete
C. When installing the first controller
D. When installing each controller -ANSWER-D. When installing each controller
