FLORIDA ROOFING TRADE KNOWLEDGE LICENSING
EXAMINATION COMPLETE PRACTICE EXAM |
ORIGINAL STUDY QUESTIONS AND DETAILED
ANSWERS | UPDATED 2026/2027 EDITION
Examiner/Administrator: Florida Department of Business and Professional
Regulation (DBPR) – Construction Industry Licensing Board (CILB)
<center>
FLORIDA ROOFING TRADE KNOWLEDGE LICENSING EXAMINATION
2026/2027 EDITION
COMPREHENSIVE PRACTICE EXAM
120 ORIGINAL MULTIPLE-CHOICE QUESTIONS
Passing Score: 70%
Testing Time: 300 Minutes
</center>
TABLE OF CONTENTS
1. Florida Statutes & Administrative Rules
2. OSHA Safety Requirements
3. Roofing Materials & Systems
4. Roof Decks & Structural Components
5. Flashings & Waterproofing
6. Roof Installation Practices
,7. Estimating & Project Management
8. Building Code Compliance
9. Wind Resistance & Hurricane Requirements
10. Inspection, Repair & Maintenance
FLORIDA DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION (DBPR) ||
CONSTRUCTION INDUSTRY LICENSING BOARD (CILB) || ALIGNED WITH CURRENT
FLORIDA BUILDING CODE COMPETENCIES || ORIGINAL PRACTICE QUESTIONS ||
COMPREHENSIVE LICENSING EXAM PREPARATION || CREATED FOR EDUCATIONAL
STUDY PURPOSES ONLY || UPDATED 2026/2027 EDITION
Roofing Laws, Safety & Regulations (Questions 1–10)
QUESTION 1
A roofing contractor is preparing a reroofing project on an occupied commercial
building. Before beginning work, the contractor identifies an unprotected roof edge
located 18 feet above grade where employees will install insulation panels. According
to OSHA requirements, what is the most appropriate method of protecting workers?
A. Require employees to wear hard hats only.
B. Install a compliant fall protection system such as guardrails, personal fall arrest
systems, or safety nets.
C. Place warning signs at each roof edge.
D. Require workers to stay at least 2 feet from the roof edge.
Correct Answer: B. Install a compliant fall protection system such as guardrails,
personal fall arrest systems, or safety nets.
Explanation: OSHA requires fall protection for employees exposed to falls of six feet or
more in construction activities. Guardrails, personal fall arrest systems, or safety nets
,provide compliant protection. Hard hats protect against impact injuries but not falls.
Warning signs alone are insufficient, and maintaining a set distance from an
unprotected edge does not eliminate fall hazards.
QUESTION 2
During a reroofing project, deteriorated decking is discovered beneath the existing
membrane. What should the contractor do before installing new roofing materials?
A. Cover the damaged deck with insulation.
B. Install additional roofing felt over the damaged area.
C. Repair or replace the deteriorated deck to restore structural integrity.
D. Continue roofing if the damage covers less than 10 square feet.
Correct Answer: C. Repair or replace the deteriorated deck to restore structural
integrity.
Explanation: Roofing systems depend on sound structural support. Damaged decking
must be repaired or replaced before new roofing materials are installed. Covering
deterioration conceals defects and can lead to premature failure, code violations, and
unsafe conditions.
QUESTION 3
A roofing contractor receives revised construction documents after the permit has
been issued. What is generally the most appropriate action?
A. Ignore the revisions until final inspection.
B. Build according to whichever drawings are less expensive.
C. Determine whether revised plans require approval before continuing construction.
D. Proceed immediately because permits cannot be modified.
, Correct Answer: C. Determine whether revised plans require approval before
continuing construction.
Explanation: Significant design changes frequently require review and approval by the
authority having jurisdiction. Continuing construction without appropriate approvals
may result in failed inspections, stop-work orders, or corrective work.
QUESTION 4
Which document primarily establishes the contractor's legal scope of work on a
roofing project?
A. Material warranty
B. Equipment rental agreement
C. Construction contract
D. Product brochure
Correct Answer: C. Construction contract.
Explanation: The construction contract defines the agreed scope, responsibilities,
schedule, payment terms, and obligations of the parties. Warranties, rental agreements,
and product literature do not establish contractual scope.
QUESTION 5
Which action best demonstrates compliance with a jobsite hazard communication
program?
A. Storing chemical containers without labels.
B. Making Safety Data Sheets readily available to workers.
C. Allowing employees to identify chemicals by color.
D. Keeping chemical information only in the project office after work hours.
EXAMINATION COMPLETE PRACTICE EXAM |
ORIGINAL STUDY QUESTIONS AND DETAILED
ANSWERS | UPDATED 2026/2027 EDITION
Examiner/Administrator: Florida Department of Business and Professional
Regulation (DBPR) – Construction Industry Licensing Board (CILB)
<center>
FLORIDA ROOFING TRADE KNOWLEDGE LICENSING EXAMINATION
2026/2027 EDITION
COMPREHENSIVE PRACTICE EXAM
120 ORIGINAL MULTIPLE-CHOICE QUESTIONS
Passing Score: 70%
Testing Time: 300 Minutes
</center>
TABLE OF CONTENTS
1. Florida Statutes & Administrative Rules
2. OSHA Safety Requirements
3. Roofing Materials & Systems
4. Roof Decks & Structural Components
5. Flashings & Waterproofing
6. Roof Installation Practices
,7. Estimating & Project Management
8. Building Code Compliance
9. Wind Resistance & Hurricane Requirements
10. Inspection, Repair & Maintenance
FLORIDA DEPARTMENT OF BUSINESS AND PROFESSIONAL REGULATION (DBPR) ||
CONSTRUCTION INDUSTRY LICENSING BOARD (CILB) || ALIGNED WITH CURRENT
FLORIDA BUILDING CODE COMPETENCIES || ORIGINAL PRACTICE QUESTIONS ||
COMPREHENSIVE LICENSING EXAM PREPARATION || CREATED FOR EDUCATIONAL
STUDY PURPOSES ONLY || UPDATED 2026/2027 EDITION
Roofing Laws, Safety & Regulations (Questions 1–10)
QUESTION 1
A roofing contractor is preparing a reroofing project on an occupied commercial
building. Before beginning work, the contractor identifies an unprotected roof edge
located 18 feet above grade where employees will install insulation panels. According
to OSHA requirements, what is the most appropriate method of protecting workers?
A. Require employees to wear hard hats only.
B. Install a compliant fall protection system such as guardrails, personal fall arrest
systems, or safety nets.
C. Place warning signs at each roof edge.
D. Require workers to stay at least 2 feet from the roof edge.
Correct Answer: B. Install a compliant fall protection system such as guardrails,
personal fall arrest systems, or safety nets.
Explanation: OSHA requires fall protection for employees exposed to falls of six feet or
more in construction activities. Guardrails, personal fall arrest systems, or safety nets
,provide compliant protection. Hard hats protect against impact injuries but not falls.
Warning signs alone are insufficient, and maintaining a set distance from an
unprotected edge does not eliminate fall hazards.
QUESTION 2
During a reroofing project, deteriorated decking is discovered beneath the existing
membrane. What should the contractor do before installing new roofing materials?
A. Cover the damaged deck with insulation.
B. Install additional roofing felt over the damaged area.
C. Repair or replace the deteriorated deck to restore structural integrity.
D. Continue roofing if the damage covers less than 10 square feet.
Correct Answer: C. Repair or replace the deteriorated deck to restore structural
integrity.
Explanation: Roofing systems depend on sound structural support. Damaged decking
must be repaired or replaced before new roofing materials are installed. Covering
deterioration conceals defects and can lead to premature failure, code violations, and
unsafe conditions.
QUESTION 3
A roofing contractor receives revised construction documents after the permit has
been issued. What is generally the most appropriate action?
A. Ignore the revisions until final inspection.
B. Build according to whichever drawings are less expensive.
C. Determine whether revised plans require approval before continuing construction.
D. Proceed immediately because permits cannot be modified.
, Correct Answer: C. Determine whether revised plans require approval before
continuing construction.
Explanation: Significant design changes frequently require review and approval by the
authority having jurisdiction. Continuing construction without appropriate approvals
may result in failed inspections, stop-work orders, or corrective work.
QUESTION 4
Which document primarily establishes the contractor's legal scope of work on a
roofing project?
A. Material warranty
B. Equipment rental agreement
C. Construction contract
D. Product brochure
Correct Answer: C. Construction contract.
Explanation: The construction contract defines the agreed scope, responsibilities,
schedule, payment terms, and obligations of the parties. Warranties, rental agreements,
and product literature do not establish contractual scope.
QUESTION 5
Which action best demonstrates compliance with a jobsite hazard communication
program?
A. Storing chemical containers without labels.
B. Making Safety Data Sheets readily available to workers.
C. Allowing employees to identify chemicals by color.
D. Keeping chemical information only in the project office after work hours.
