Special Inspections and Tests in Building Code Chapter
17: 2026: Complete Prep Guide with 100+ Questions,
Answers & Explanations for Guaranteed Pass
What must new building materials undergo according to
Section 1702? - ✔✔ANSWER ✔✔-They must be subjected
to tests prescribed in this chapter to determine their
character, quality, and limitations of use.
What is required of an approved agency in terms of
independence? - ✔✔ANSWER ✔✔-An approved agency
must be objective, competent, and independent from the
contractor responsible for the work being inspected.
What must be provided for the building official to
determine compliance? - ✔✔ANSWER ✔✔-Specific
,information consisting of test reports conducted by an
approved agency and other necessary information.
What does Section 1703.5 require for labeling products? -
✔✔ANSWER ✔✔-Products must be labeled according to
specific procedures, including testing, inspection, and
identification.
What is the significance of the record of approval
mentioned in Section 1703.3? - ✔✔ANSWER ✔✔-It keeps
a record of any approved material, appliance, equipment,
or system, including conditions and limitations of the
approval.
What must the label of a product include according to
Section 1703.5.3? - ✔✔ANSWER ✔✔-The label must
contain the manufacturer's identification, model number,
serial number, and performance characteristics.
What is the role of the owner or authorized agent
regarding prefabricated assemblies? - ✔✔ANSWER ✔✔-
They must submit a report indicating details of the
,assembly, including test results and other necessary data
for approval.
What does Section 1704.1 outline? - ✔✔ANSWER ✔✔-It
outlines the general requirements for special inspections
and tests, contractor responsibilities, and structural
observations.
What is required for special inspections according to
Section 1704.2? - ✔✔ANSWER ✔✔-The owner or
authorized agent must employ approved agencies to
provide special inspections and tests during construction.
What does Section 1703.4.1 state about research and
investigation? - ✔✔ANSWER ✔✔-Sufficient technical data
must be submitted to substantiate the proposed use of
any product, material, or assembly.
What is the purpose of the testing performed by an
approved agency? - ✔✔ANSWER ✔✔-To verify compliance
with relevant standards for the product, material, or
assembly being labeled.
, What must the equipment of an approved agency be
capable of according to Section 1703.1.2? - ✔✔ANSWER
✔✔-The equipment must be adequate to perform required
tests and must be periodically calibrated.
What is the requirement for personnel in an approved
agency as per Section 1703.1.3? - ✔✔ANSWER ✔✔-They
must be experienced and educated in conducting,
supervising, and evaluating tests and special inspections.
What happens if the evidence submitted for a product is
satisfactory? - ✔✔ANSWER ✔✔-The building official shall
approve the use of the product, material, or assembly
subject to the code requirements.
What does the term 'special inspections' refer to? -
✔✔ANSWER ✔✔-Inspections that are in addition to those
conducted by the building official, required for specific
types of work.
17: 2026: Complete Prep Guide with 100+ Questions,
Answers & Explanations for Guaranteed Pass
What must new building materials undergo according to
Section 1702? - ✔✔ANSWER ✔✔-They must be subjected
to tests prescribed in this chapter to determine their
character, quality, and limitations of use.
What is required of an approved agency in terms of
independence? - ✔✔ANSWER ✔✔-An approved agency
must be objective, competent, and independent from the
contractor responsible for the work being inspected.
What must be provided for the building official to
determine compliance? - ✔✔ANSWER ✔✔-Specific
,information consisting of test reports conducted by an
approved agency and other necessary information.
What does Section 1703.5 require for labeling products? -
✔✔ANSWER ✔✔-Products must be labeled according to
specific procedures, including testing, inspection, and
identification.
What is the significance of the record of approval
mentioned in Section 1703.3? - ✔✔ANSWER ✔✔-It keeps
a record of any approved material, appliance, equipment,
or system, including conditions and limitations of the
approval.
What must the label of a product include according to
Section 1703.5.3? - ✔✔ANSWER ✔✔-The label must
contain the manufacturer's identification, model number,
serial number, and performance characteristics.
What is the role of the owner or authorized agent
regarding prefabricated assemblies? - ✔✔ANSWER ✔✔-
They must submit a report indicating details of the
,assembly, including test results and other necessary data
for approval.
What does Section 1704.1 outline? - ✔✔ANSWER ✔✔-It
outlines the general requirements for special inspections
and tests, contractor responsibilities, and structural
observations.
What is required for special inspections according to
Section 1704.2? - ✔✔ANSWER ✔✔-The owner or
authorized agent must employ approved agencies to
provide special inspections and tests during construction.
What does Section 1703.4.1 state about research and
investigation? - ✔✔ANSWER ✔✔-Sufficient technical data
must be submitted to substantiate the proposed use of
any product, material, or assembly.
What is the purpose of the testing performed by an
approved agency? - ✔✔ANSWER ✔✔-To verify compliance
with relevant standards for the product, material, or
assembly being labeled.
, What must the equipment of an approved agency be
capable of according to Section 1703.1.2? - ✔✔ANSWER
✔✔-The equipment must be adequate to perform required
tests and must be periodically calibrated.
What is the requirement for personnel in an approved
agency as per Section 1703.1.3? - ✔✔ANSWER ✔✔-They
must be experienced and educated in conducting,
supervising, and evaluating tests and special inspections.
What happens if the evidence submitted for a product is
satisfactory? - ✔✔ANSWER ✔✔-The building official shall
approve the use of the product, material, or assembly
subject to the code requirements.
What does the term 'special inspections' refer to? -
✔✔ANSWER ✔✔-Inspections that are in addition to those
conducted by the building official, required for specific
types of work.
