UNIVERSAL ROBOTS FINAL EXAM
QUESTIONS AND ANSWERS
Select each of the following that applies to Asimov's Laws of Robotics. (multiple
answers) - Correct Answers -- A robot may not harm a human or allow a human to
come to harm.
- A robot must obey orders from humans, except when these orders conflict with the 1st
Law.
- A robot must protect it's own existence as long as it does not conflict with the 1st or
2nd laws.
Out of the last 100 years of Robotic Automation the last 20 have been instrumental in
advancedments to Industrial and Service robots. - Correct Answers -True
What is the branch of technology that defines the design, construction, operation, and
application of robots? - Correct Answers -Robotics
What is the definition of Mechanical automata? - Correct Answers -Self-operating
machine???
In 1965, what university established the Robotics Institute? - Correct Answers -Carnegie
Mellon
Isaac Asimov was the first to use the term "robotics". What was his job? - Correct
Answers -Science Fiction Writer
Who is the person credited with designing the first humanoid robot? - Correct Answers -
Leonardo da Vinci
Industry 4.0 is called the Fourth Industrial Revolution because it started between the
year 2000-2010 and will finish by 2030. - Correct Answers -False
The automotive sector utilizes many robots in their process, the least used application
being robotic welding. - Correct Answers -False
How many types of Industrial Robots were discussed in this module? - Correct Answers
-6
Universal Robots Cobots' fit into what category of robotics? - Correct Answers -
Stationary
, DELTA Robot Arms have three connected arms that are able to move a single end of
arm tool within a dome-shaped area. - Correct Answers -True
Which of these is a Robot manufacturer? (multiple answers) - Correct Answers --
universal robots
- FANUC
- Yaskawa
Articulated Robot Arms can have up to 10 or more interacting joint systems. - Correct
Answers -True
Quality can improve on assembly applications by implementing industrial robots as they
perform all tasks consistently. - Correct Answers -True
All robots used for painting applications have hollow wrist designs to allow for paint gun
material to travel through the arm. - Correct Answers -False
The Speed Slider located in the Footer Menu allows you to change the speed in real
time. - Correct Answers -True
How many joints does the robot have? - Correct Answers -6
When installing an end effector - the TCP, Payload, and CoG should be entered on the
installation tab. - Correct Answers -True
There is an E-Stop (Emergency Stop) button on the Teach Pendant. - Correct Answers
-True
What options appear in the getting started menu? (multiple answers) - Correct Answers
-- Run a Program
- Program the Robot
- Configure Robot Installation
What appropriate methods are used to determine the TCP value of an end effector?
(multiple answers) - Correct Answers -- Ruler
- CAD Files
- Setup Wizard
What is the maximum voltage for Digital I/Os on the Safety Control Board? - Correct
Answers -24 Volts
What is the correct definition of Center of Gravity? - Correct Answers -The point on the
end effector where mass is evenly distributed on each side
What does the acronym TCP stand for? - Correct Answers -Tool Center Point
QUESTIONS AND ANSWERS
Select each of the following that applies to Asimov's Laws of Robotics. (multiple
answers) - Correct Answers -- A robot may not harm a human or allow a human to
come to harm.
- A robot must obey orders from humans, except when these orders conflict with the 1st
Law.
- A robot must protect it's own existence as long as it does not conflict with the 1st or
2nd laws.
Out of the last 100 years of Robotic Automation the last 20 have been instrumental in
advancedments to Industrial and Service robots. - Correct Answers -True
What is the branch of technology that defines the design, construction, operation, and
application of robots? - Correct Answers -Robotics
What is the definition of Mechanical automata? - Correct Answers -Self-operating
machine???
In 1965, what university established the Robotics Institute? - Correct Answers -Carnegie
Mellon
Isaac Asimov was the first to use the term "robotics". What was his job? - Correct
Answers -Science Fiction Writer
Who is the person credited with designing the first humanoid robot? - Correct Answers -
Leonardo da Vinci
Industry 4.0 is called the Fourth Industrial Revolution because it started between the
year 2000-2010 and will finish by 2030. - Correct Answers -False
The automotive sector utilizes many robots in their process, the least used application
being robotic welding. - Correct Answers -False
How many types of Industrial Robots were discussed in this module? - Correct Answers
-6
Universal Robots Cobots' fit into what category of robotics? - Correct Answers -
Stationary
, DELTA Robot Arms have three connected arms that are able to move a single end of
arm tool within a dome-shaped area. - Correct Answers -True
Which of these is a Robot manufacturer? (multiple answers) - Correct Answers --
universal robots
- FANUC
- Yaskawa
Articulated Robot Arms can have up to 10 or more interacting joint systems. - Correct
Answers -True
Quality can improve on assembly applications by implementing industrial robots as they
perform all tasks consistently. - Correct Answers -True
All robots used for painting applications have hollow wrist designs to allow for paint gun
material to travel through the arm. - Correct Answers -False
The Speed Slider located in the Footer Menu allows you to change the speed in real
time. - Correct Answers -True
How many joints does the robot have? - Correct Answers -6
When installing an end effector - the TCP, Payload, and CoG should be entered on the
installation tab. - Correct Answers -True
There is an E-Stop (Emergency Stop) button on the Teach Pendant. - Correct Answers
-True
What options appear in the getting started menu? (multiple answers) - Correct Answers
-- Run a Program
- Program the Robot
- Configure Robot Installation
What appropriate methods are used to determine the TCP value of an end effector?
(multiple answers) - Correct Answers -- Ruler
- CAD Files
- Setup Wizard
What is the maximum voltage for Digital I/Os on the Safety Control Board? - Correct
Answers -24 Volts
What is the correct definition of Center of Gravity? - Correct Answers -The point on the
end effector where mass is evenly distributed on each side
What does the acronym TCP stand for? - Correct Answers -Tool Center Point
