ROBOTICS SEMESTER 1 FINAL EXAM
REVIEW QUESTIONS AND ANSWERS
System that consist of a spur gear and a rod or bar that has teeth cut along the length -
Correct Answers -Rack and pinion
Software/hardware that is capable of processing data similar to human thought,
giving it the ability to deal with questions where there is no clear right answer, or where
multiple answers
would work as well as ultimately intuitive jumps in problem solving. - Correct Answers -
Artificial Intelligent (AI):
the main wheel of the motor, it used to be the one motor that turned and gave energy to
all other belts. For safety many belts fly overhead where no one could be accidentally
pulled
through and killed - Correct Answers -Flywheel:
Rubberbands - Correct Answers -What does an impact launcher use to store potential
energy?
a condition where the robot runs the program without continued
operator input based on the operating parameters of the program. - Correct Answers -
Autonomous - Automatic Mode:
to bring a mechanism higher than the base - Correct Answers -What is a lift used for?
they are used to stabilize your lift as well as center the shaft - Correct Answers -What
are bearing flats used for with lifts?
True - Correct Answers -Gears are most commonly used for all lifts.
Scissor, Bar, Reverse Bar, Cascade/Elevator - Correct Answers -Types of lift:
Open ended wrench/Crescent wrench
versus Allen wrench/Hex key
Torque allen wrench - Correct Answers -Distinguish/Identify different types of wrenches:
, a device consisting of a bar or wheel with a set of angled teeth in which a pawl, cog, or
tooth engages, allowing motion in one direction only. - Correct Answers -What is a
Ratchet?
Needle nose pliers - Correct Answers -What is this tool?
A robotic system designed to mimic the human part it replaces that is controlled by
nerve
impulses, usually through the use of transmitters implanted into the users body. -
Correct Answers -Bionic:
The number of teeth on the starting gear divided by the gear at the
end. - Correct Answers -How do you calculate a gear ratio?
The power or speed of a gear train - Correct Answers -What does the gear ratio tell
you?
A gear on a dedicated shaft used to change the direction of the output gear and/or to
link to
gears together when there is a large distance between the gears. - Correct Answers -
Idler gear:
Multiply the gear ratio by the RPM of the motor - Correct Answers -To find the RPM with
gear ratios:
REVIEW QUESTIONS AND ANSWERS
System that consist of a spur gear and a rod or bar that has teeth cut along the length -
Correct Answers -Rack and pinion
Software/hardware that is capable of processing data similar to human thought,
giving it the ability to deal with questions where there is no clear right answer, or where
multiple answers
would work as well as ultimately intuitive jumps in problem solving. - Correct Answers -
Artificial Intelligent (AI):
the main wheel of the motor, it used to be the one motor that turned and gave energy to
all other belts. For safety many belts fly overhead where no one could be accidentally
pulled
through and killed - Correct Answers -Flywheel:
Rubberbands - Correct Answers -What does an impact launcher use to store potential
energy?
a condition where the robot runs the program without continued
operator input based on the operating parameters of the program. - Correct Answers -
Autonomous - Automatic Mode:
to bring a mechanism higher than the base - Correct Answers -What is a lift used for?
they are used to stabilize your lift as well as center the shaft - Correct Answers -What
are bearing flats used for with lifts?
True - Correct Answers -Gears are most commonly used for all lifts.
Scissor, Bar, Reverse Bar, Cascade/Elevator - Correct Answers -Types of lift:
Open ended wrench/Crescent wrench
versus Allen wrench/Hex key
Torque allen wrench - Correct Answers -Distinguish/Identify different types of wrenches:
, a device consisting of a bar or wheel with a set of angled teeth in which a pawl, cog, or
tooth engages, allowing motion in one direction only. - Correct Answers -What is a
Ratchet?
Needle nose pliers - Correct Answers -What is this tool?
A robotic system designed to mimic the human part it replaces that is controlled by
nerve
impulses, usually through the use of transmitters implanted into the users body. -
Correct Answers -Bionic:
The number of teeth on the starting gear divided by the gear at the
end. - Correct Answers -How do you calculate a gear ratio?
The power or speed of a gear train - Correct Answers -What does the gear ratio tell
you?
A gear on a dedicated shaft used to change the direction of the output gear and/or to
link to
gears together when there is a large distance between the gears. - Correct Answers -
Idler gear:
Multiply the gear ratio by the RPM of the motor - Correct Answers -To find the RPM with
gear ratios:
