PROJECT MANAGEMENT FOR GENERAL
CONTRACTOR 2026 | COMPLETE STUDY
GUIDE & PRACTICE QUESTIONS
| GRADED A+ | GUARANTEED SUCCESS
Updated 2026 Questions and Answers
100% Verified Exam Prep and Comprehensive
Rationales Included
,What is necessary to understand the nature of soil?
(a) Excavation knowledge
(b) Job site
(c) Sample of the Soil
(d) Surface Evaluation
(c) Sample of the Soil
P&P pg. 14
What is not a requirement for specific information about each employee that must be
maintained in their records?
0 (a) Home address including zip code.
0 (b) Total premium pay for overtime.
0 (c) Total wages paid each pay period.
@ (d) Date of birth if under 20.
(d) Date of birth if under 20.
CM pg. 5-30 (if under 19)
Where resilient furring channels are used in wood framing, channels shall not be located
more than ___________ inches from the ceiling.
(a) 2"
(b) 5"
(c) 6"
(d) 4"
(c) 6"
***MEMORIZE***
Gypsum Panel Products, 4.1.6
,How many days does Portland cement have to cure before allowing regular traffic on the
floor?
(a) At least 10 days
(b) At least 14 days
(c) At least 7 days
(d) At least 5 days
(c) At least 7 days
***MEMORIZE***
D&C PG. 374
A manufacturer finds a variety of rope that will, on average, break under a 5,000 lb. load. If
the rope is to be used for hoisting personnel, what should be the labeled maximum rating
of the rope?
(a) 1,000 lbs.
(b) 500 lbs.
(c) 750 lbs.
(d) 1,200 lbs.
(b) 500 lbs.
OSHA
When hoisting bundles of reinforcing bars roughly ___ feet or longer, it may be necessary to
use a spreader bar so that the reinforcing bars will not bend excessively.
(a) 20
(b) 30
(c) 40
(d) 50
(b) 30
BCSI pg. 9
, What are the 2 basic styles of hot roll I-shaped section used for structural purposes?
(a) S and W
(b) S and V
(c) WT and C
(d) HP and W
0 (ti> S•11d V
0 (t '1WTa·,~C
:) (d) Hf' aml W
(a) S and W
P&P pg. 342
Any ______________ coating on Reinforcing bars should be washed off before they are placed.
(a) Rust
(b) Scales
(c) Mud
(d) Deformations
(c) Mud
***MEMORIZE***
Rebar 8-3
CONTRACTOR 2026 | COMPLETE STUDY
GUIDE & PRACTICE QUESTIONS
| GRADED A+ | GUARANTEED SUCCESS
Updated 2026 Questions and Answers
100% Verified Exam Prep and Comprehensive
Rationales Included
,What is necessary to understand the nature of soil?
(a) Excavation knowledge
(b) Job site
(c) Sample of the Soil
(d) Surface Evaluation
(c) Sample of the Soil
P&P pg. 14
What is not a requirement for specific information about each employee that must be
maintained in their records?
0 (a) Home address including zip code.
0 (b) Total premium pay for overtime.
0 (c) Total wages paid each pay period.
@ (d) Date of birth if under 20.
(d) Date of birth if under 20.
CM pg. 5-30 (if under 19)
Where resilient furring channels are used in wood framing, channels shall not be located
more than ___________ inches from the ceiling.
(a) 2"
(b) 5"
(c) 6"
(d) 4"
(c) 6"
***MEMORIZE***
Gypsum Panel Products, 4.1.6
,How many days does Portland cement have to cure before allowing regular traffic on the
floor?
(a) At least 10 days
(b) At least 14 days
(c) At least 7 days
(d) At least 5 days
(c) At least 7 days
***MEMORIZE***
D&C PG. 374
A manufacturer finds a variety of rope that will, on average, break under a 5,000 lb. load. If
the rope is to be used for hoisting personnel, what should be the labeled maximum rating
of the rope?
(a) 1,000 lbs.
(b) 500 lbs.
(c) 750 lbs.
(d) 1,200 lbs.
(b) 500 lbs.
OSHA
When hoisting bundles of reinforcing bars roughly ___ feet or longer, it may be necessary to
use a spreader bar so that the reinforcing bars will not bend excessively.
(a) 20
(b) 30
(c) 40
(d) 50
(b) 30
BCSI pg. 9
, What are the 2 basic styles of hot roll I-shaped section used for structural purposes?
(a) S and W
(b) S and V
(c) WT and C
(d) HP and W
0 (ti> S•11d V
0 (t '1WTa·,~C
:) (d) Hf' aml W
(a) S and W
P&P pg. 342
Any ______________ coating on Reinforcing bars should be washed off before they are placed.
(a) Rust
(b) Scales
(c) Mud
(d) Deformations
(c) Mud
***MEMORIZE***
Rebar 8-3
