IICRC WRT WATER RESTORATION TECHNICIAN CERTIFICATION EXAM QUESTION BANK / ACTUAL EXAM WITH QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS) ALREADY GRADED A+ / IICRC WATER DAMAGE RESTORATION TRAINING MANUAL EXAM | 2026 GUARANTEED PASS

IICRC WRT WATER RESTORATION TECHNICIAN CERTIFICATION EXAM QUESTION BANK / ACTUAL EXAM WITH QUESTIONS AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS) ALREADY GRADED A+ / IICRC WATER DAMAGE RESTORATION TRAINING MANUAL EXAM | 2026 GUARANTEED PASS Documents what types of materials have been affected. Must evaluate materials against 3 criteria to identify if should be replaced or restored. 1) degree of containment 2) damage to item 3) replacement cost versus restoration cost - Correct Answer Documentation (2 of restorative drying process) Due to the # of variables, restorer must frequently revisit the 1) tools 2) systems 3) science throughout the ______ - Correct Answer drying process Directions - Correct Answer whenever a chemical antimicrobial or biocide is used restorers must follow the label ____ explicitly Single most critical factor in defining amount of potential damage is the amount of time the structure remains/was ______. - Correct Answer Abnormally wet #1 critical course of action in restorative drying is to ______. - Correct Answer Respond quickly 1) Assessment 2) Documentation 3) Controlled drying 4) Selective replacement - Correct Answer Restorative drying process Standard of care for the water restoration profession - Correct Answer IICRC S500 All ___ is fungi but not all fungi is ___. - Correct Answer mold Occupants - Correct Answer most antimicrobials require that the area of application be vacated by ______ and pets during application and or a period of time after application. - Correct Answer * The label is the law" get customer briefing before starting any antimicrobial / biocide treatment. Dry standard , unaffected - Correct Answer establishing _______ is the best way to set restorative dying goals. A dry standard is established by obtaining a moisture reading using an ____ material ______ is to transform an abnormally wet, potentially damaged structure into an environment of equal or better appearance. - Correct Answer Goal of restorative process Causing or able to cause disease - Correct Answer pathogenic ______ : Identify all affected materials - Correct Answer Assessment (1 of restorative drying process) "DRYING IN PLACE" / little to no manipulation A) less contaminated B) less damaged C) replacing is COSTLY D) can ONLY be used w/ category 1 - Correct Answer Aggressive - drying method 1) Humidity 2) Air flow 3) Temperature - Correct Answer Drying Pie (3) The technician's FIRST responsibility when arriving at a water damage site is to identify and eliminate ________. - Correct Answer Safety hazards First line of defense against safety hazards is _______. 2nd is to identify the presence of regulated building materials (asbestos, lead, pcbs) - Correct Answer Safety Awareness Elimination Substitution Engineering Controls Administrative Controls PPE (LEAST EFFECTIVE) - Correct Answer Hierarchy of Controls 1 Gallon = __.34 pounds (8 is always weight) - Correct Answer 8 Two drying methods: 1) ________ "d for demolition" 2) Aggressive - Correct Answer Disruptive A) more contaminated B) more damaged C) replacing is cheaper - Correct Answer Disruptive - drying method Last line of defense is ____ - Correct Answer PPE An agreement between the building owner and the restoration contractor. The form specifies who is responsible for payment and the terms of payment - Correct Answer Work Authorization Form Materially interested parties - Correct Answer MIP Materially interested parties